General Specifications
Features & Benefits
- Load: 20 lbs/square food of belt
- Belt Widths: 6″ to 60″
- Lengths: 36″ to 40′
- Belt speed: 328 ft/min maximum
- 3.5″ diameter drive roller with cast-on Urethane lagging
- UHMW Wear strip bed plate
- Continuous TIG welded 304 stainless steel frame
- #4 Polish on all outside surfaces
- Bearing material is 400 stainless steel
- Bearing lubricant is H1 type FDA lubricant
- FDA approved belting and plastic components
- Straight Flat and Cleated Belt Conveyor Models
- Z-Frame Flat and Cleated Belt Conveyor Models (0 to 60°+)
- Loads up to 20 lbs per square foot of conveyor belt (90 kg/m2)
- Widths up to 60” (1524 mm)
- Lengths 36” (914 mm) up to 480” (12.2 m)
- Continuous TIG Welded 304 stainless steel frame
- Frame is designed with no horizontal surfaces for optimum cleaning. Conveyors over 10′ long consist of multiple sections which are bolted together (can be welded together on site).
- Bearings are mounted in cast stainless steel housing for maximum performance in washdown environments
- Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
- the tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
- Open Belt Tracking Flanges and solid UHMW idler pucks create access to pulleys.
- Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
- The return belt supports are segmented plastic slide blocks and are easily removed without tools for effective cleaning.
- Drive sprockets are located on 1.5″ square stainless steel shaft without fasteners to provide optimum drive strength and cleanability.
- Nose bar idler ends (optional) are constructed of machined UHMW bar to provide a 1.5″ diameter transfer.
- The nose bar drive configuration (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
- Belt lifters (optional) raise the belt from the wear strips by simply pulling an external lever for fast access and effective cleaning
- TIG welded stand offs keep fasteners out of the food zone.