Model CDLR26 has the same rugged features as our Model CDLR25, with the added benefit of heavy wall rollers. The heavy wall rollers are an excellent choice for impact zones or fork truck load/unload stations.
CDLR26 SPECIFICATIONS
EFFECTIVE WIDTH: 6" - 60"
LENGTH: 48" - 900"
BEGINNING ELEVATION: 7" - 120"
ENDING ELEVATION: 7" - 120"
SPEED: 10 - 150 FPM
ROLLER CENTERS: 4.5", 6", 9", 12"
ROLLERS: CDLR25 Roller - 2.50" diameter, 11ga wall tube. CDLR26 Roller - 2.625" diameter, 7ga wall tube. All rollers with 11/16" hex cold rolled steel axles, spring retained. Standard bearings are precision, grease packed bearings.
DRIVE: Standard drive is mounted high near center of conveyor length on chainbox side. Optional drives include drive mounted low or drive mounted below and within, near center.
FRAME: Standard frame includes 6” channel on chain box side and 4” channel on opposite side with roller set high in frame. Optional frame options include 6” channel on opposite side with roller set low in the frame, or structural 6@8.2# & 4@5.4# with rollers set high, or structural 6@8.2# both sides with roller set low.
MOTOR: 1/2 HP through 2 HP. Energy efficient and inverter duty motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60 and 575/3/60 & DC Voltage.
ROLLER COVERS: Standard roller surface is carbon steel. Optional roller covers for 2.5" rollers includes galvanized roller tube, polyurethane roller sleeves, Ultrex accumulation sleeves.
SUPPORT CENTERS: Standard supports are floor supports on 5’ center.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.