Industrial Belt Drive 20

For mounting heights to 20′ (environmental separation) and 18′ (insect control).

Available in single lengths from 5′ to 16′. Durable, all welded construction with gray powder-coated aluminized steel exterior and removable lower section for simplified access to internal components.

  • Used to keep temperatures stable and flying insects out when the doors are open.
  • Engineered to perform and built to last
  • Simple to install, operate, and maintain
  • Made in U.S.A.

Berner is a UL Listed panel shop, authorized to build UL listed Motor Control Panels.


AMBIENT

  • 21″ high x 32 ¼” deep
  • Single-speed T.E.F.C. motor — belt drive
  • Gray powder-coated exterior (optional: custom color, RAL colors 1000 to 9023 only, or stainless)
  • Split cabinet construction for fan assembly removal
  • Removable access panels
  • Top mounting only
  • High efficiency Pro-V Nozzle
  • Motor location top right (optional: top left, front left or front right)

STEAM/HOT WATER HEAT

  • 21″ high x 32 ¼” deep
  • Single-speed T.E.F.C. motor — belt drive
  • Gray powder-coated exterior (optional: custom color or stainless)
  • Split cabinet construction for fan assembly removal
  • Removable access panels
  • Top mounting only
  • High efficiency Pro-V Nozzle
  • Motor location top right (optional: top left, front left or front right)
  • Coil features:
    • Galvanized steel casing
    • 5/8″ copper tube with .035″ wall
    • Aluminum fins
    • Leak tested at 450 psi

POSITIVE INDIRECT GAS

  • Single-speed T.E.F.C. motor — belt drive
  • Gray powder-coated exterior (optional: custom color or stainless)
  • Split cabinet construction for fan assembly removal
  • Removable access panels
  • Top mounting only
  • High efficiency Pro-V Nozzle
  • Motor location top right (optional: top left)
  • Factory mounted duct transition with bottom access panels
  • Field installed CSA Certified indirect gas heater(s):
    • Aluminized steel heat exchanger (optional: stainless)
    • Steel cabinet with beige finish
    • Spark ignited pilot
    • Power venter
    • Separate 120V power supply required (Optional: Transformer for single point connection)

DIRECT GAS

  • Single-speed T.E.F.C. motor — belt drive
  • Gray powder-coated exterior (optional: custom color or stainless)
  • Split cabinet construction for fan assembly removal
  • Removable access panels
  • Top mounting only
  • High efficiency Pro-V Nozzle
  • Motor location top right (optional: top left, front left or front right)
  • Factory mounted duct transition with bottom access panels
  • Factory mounted modulating direct-fired heater with FM/IRI gas train
    • Factory mounted wired heater control cabinet
    • Steel cabinet with gray finish
    • Spark ignited intermittent pilot