For mounting heights to 14′ (environmental separation) and 12′ (insect control).
Available in single lengths from 3′ to 16′. Durable, all welded construction with gray powder-coated exterior and mill aluminum inlet panel. Designed to be simple to install, operate and maintain.
- Used to keep temperatures stable and flying insects out when the doors are open.
- Engineered to perform and built to last
- Simple to install, operate, and maintain
- Made in U.S.A.
Berner is a UL Listed panel shop, authorized to build UL listed Motor Control Panels.
AMBIENT
- 15″ high x 18″ deep
- 1 hp single-speed motor(s) — direct drive (optional: two-speed)
- Gray powder-coated exterior with mill aluminum screen and access panels (optional: custom color or stainless)
- Wall and top mounting
- High efficiency Pro-V Nozzle
ELECTRIC HEAT
- 15″ high x 18″ deep
- 1 hp single-speed motor(s) — direct drive (optional: two-speed)
- Gray powder-coated exterior with mill aluminum screen and access panels (optional: custom color or stainless)
- Wall and top mounting
- High efficiency Pro-V Nozzle
- Patented venturi open helical element with point suspension
- Thermal overload protection
- Galvanized steel frame
- Factory mounted heater control panel
- Alternate KW available
STEAM / HOT WATER HEAT
- 15″ high x 18″ deep
- 1 hp single-speed motor(s) — direct drive (optional: two-speed)
- Gray powder-coated exterior with mill aluminum screen and access panels (optional: custom color or stainless)
- Wall and top mounting
- High efficiency Pro-V Nozzle
- Coil features:
- Galvanized steel casing
- 5/8″ copper tube with .035″ wall
- Aluminum fins
- Leak tested at 450 psi
POSITIVE INDIRECT GAS
See mechanical drawings for dimensions.
- 1 hp single-speed motor(s) — direct drive (optional: two-speed)
- Gray powder-coated exterior with mill aluminum screen and access panels (optional: custom color or stainless)
- Top mounting only
- High efficiency Pro-V Nozzle
- Factory mounted duct transition with bottom access panels
- Field installed CSA Certified indirect gas heater(s):
- Aluminized steel heat exchanger (Optional: Stainless)
- Steel cabinet with beige finish
- Spark ignited pilot
- Power venter
- Separate 120V power supply required (optional: transformer for single point connection)