Berner CF Air Curtain Application

Industrial Direct Drive 20

For mounting heights to 20′ (environmental separation) and 18′ (insect control).

Available in single lengths from 5′ to 16′. Durable, all welded construction with gray powder-coated aluminized steel exterior and removable lower section for simplified access to internal components.

  • Used to keep temperatures stable and flying insects out when the doors are open.
  • Engineered to perform and built to last
  • Simple to install, operate, and maintain
  • Made in U.S.A.

Berner is a UL Listed panel shop, authorized to build UL listed Motor Control Panels.

AMBIENT

  • 21″ high x 32 ¼” deep
  • Single-speed T.E.A.O. motor(s) — direct drive
  • Gray powder-coated exterior (optional: custom color or stainless)
  • Split cabinet construction for fan assembly removal
  • Top mounting only
  • High efficiency Pro-V Nozzle

 ELECTRIC HEAT

  • 21″ high x 38 ¼” deep
  • Single-speed T.E.A.O. motor — direct drive
  • Gray powder-coated exterior (optional: custom color or stainless)
  • Split cabinet construction for fan assembly removal
  • Top mounting only
  • High efficiency Pro-V Nozzle
  • Open helical element with point suspension
    • Thermal overload protection
    • Galvanized steel frame
  • Factory mounted heater control panel
  • Alternate KW available

STEAM/HOT WATER HEAT

  • 21″ high x 32 ¼” deep
  • Single-speed T.E.A.O. motor — direct drive
  • Gray powder-coated exterior (optional: custom color or stainless)
  • Split cabinet construction for fan assembly removal
  • Top mounting only
  • High efficiency Pro-V Nozzle
  • Coil features:
    • Galvanized steel casing
    • 5/8″ copper tube with .035″ wall
    • Aluminum fins
    • Leak tested at 450 psi

POSITIVE INDIRECT GAS

  • Single-speed T.E.A.O. motor — direct drive
  • Gray powder-coated exterior (optional: custom color or stainless)
  • Split cabinet construction for fan assembly removal
  • Top mounting only
  • High efficiency Pro-V Nozzle
  • Factory mounted duct transition with bottom access panel
  • Field installed CSA Certified indirect gas heater(s):
    • Aluminized steel heat exchanger (optional: stainless)
    • Steel cabinet with beige finish
    • Spark ignited pilot
    • Power venter
    • Separate 120V power supply required (optional: transformer for single point connection)

DIRECT GAS

  • Single-speed T.E.A.O. motor — direct drive
  • Gray powder-coated exterior (optional: custom color or stainless)
  • Split cabinet construction for fan assembly removal
  • Top mounting only
  • High efficiency Pro-V Nozzle
  • Factory mounted duct transition with bottom access panels
  • Factory mounted modulating direct-fired heater with FM/IRI gas train
    • Factory mounted wired heater control cabinet
    • Steel cabinet with gray finish
    • Spark ignited intermittent pilot

Request More Information

Contact Us
Captcha