100

Slider and Roller Bed Belt Conveyor – BCST-100

BCST-100 (Light Duty)

  • Bolt-Together construction
  • 3 1/2 in. formed 12 ga. galvanized frame (Slider Bed)
  • 5 1/2 in. formed 12 ga. galvanized channel frame - with 1.9 dia. x 16 ga. galvanized rollers (Roller Bed)
  • Belt Widths up to 36 in.
  • Drive packages available up to 2 HP
  • Reversible (With Center Drive Option)
  • Selection available for 24 Hour shipment

 

100

STANDARD SPECIFICATIONS:

Belt
Black Trackmate 120 EMB with clipper lace

Belt widths
12", 16", 18", 20", 24", 30" and 36"

Slider Bed
3 1/2 in. deep x 12 ga. galvanized steel slider bed. Standard 5 FT. and 10 ft. long bolt-together sections with bolt-on end couplers.

Roller Bed
1.9 in. dia. x 16 ga. galvanized rollers spaced every 6 inches. Mounted in 5 1/2 in. deep x 12 ga. galvanized steel frames. Standard 5 FT. and 10 ft. long bolt-together sections with bolt-on end couplers.

Floor Supports
Adjustable 32 1/8 in. to 38 1/8 in. top of belt. One support at every bed joint and at the ends of conveyor.

Drive Pulley
4 in. dia. with 1 3/16 in. dia. shaft or 8 in. dia. with 1 7/16 in. dia. shaft, crowned and fully lagged.

Tail Pulley
4 in. dia. with 1 3/16 in. dia. shaft, crowned.

Snub Roller
2 1/2 in. dia. galvanized with grease packed ball bearings (Adjustable)

Return Rollers
1.9 in. dia. galvanized with grease packed bearings.

Take-Up
Provides belt take-up at tail pulley to allow for future belt stretch.

Bearings
Sealed, pre-lubricated, self-aligning ball bearings on drive and tail pulleys.

Conveyor Speed
Constant 60 FPM

Speed Reduction
Sealed worm gear "C" face flanged speed reducer with NO. 50 chain to drive pulley.

Motor
1/2 HP - 230/460V - 3 phase - 60Hz - totally enclosed, fan cooled.

Electrical Controls
Available as option

Frame Capacity
Slider bed maximum load per linear foot with legs on 10 ft. centers = 100 lbs. Roller bed = 240 lbs.

Request More Information

Contact Us
Captcha

Upload PO