100

Slider and Roller Bed Belt Conveyor – BCST-1200

BCST-1200 (Heavy Duty)

  • Welded Construction
  • 12 in. formed 1/4 in. plate channel frame
  • Belt Widths 24" through 72"
  • Drive packages available from 1 HP to 7 1/2 HP
  • Roller Bed: 2 1/2 in. 3 1/2 in. dia. spaced every 6 inches.

 

BCST-12 Slider and Roller Conveyor

STANDARD SPECIFICATIONS:

Belt
Black Trackmate 533 EMB with clipper lace.

Belt widths
24 in. to 72 in. in full one inch increments.

Bed
1/4 in. plate slider bed pans welded in 12 in. deep x 1/4 in. painted steel channel frames. Standard 5 FT. and 10 ft. long welded sections, with welded-in end couplers.

Floor Supports
5 in. structural channel legs with 4 in. of adjustment. Available up to 89 in. top of belt. One support at every bed joint and at the ends of conveyor.

Drive Pulley
8 in. dia. with 1 15/16 in. dia. shaft, 12 in. dia. with 1 15/16 in. dia. shaft or 2 3/16 in. dia. shaft, 16 in dia. with 2 15/16 in. dia. shaft, crowned and fully lagged.

Tail Pulley
6 in. dia. with 1 11/16 in. dia. shaft, 8 in. dia. with 1 11/16 in. dia. shaft, crowned.

Snub Roller
3 1/2 in. dia. with grease packed ball bearings (Adjustable)

Return Rollers
1.9 in. dia. or 2 1/2 in. dia. with grease packed bearings.

Take-Up
Provides belt take-up at tail pulley to allow for future belt stretch.

Bearings
Sealed, pre-lubricated, self-aligning ball bearings on drive and tail pulleys

Conveyor Speed
Constant 30 FPM

Speed Reduction
Sealed worm gear "C" face flanged speed reducer.

Motor
230/460V - 3 phase - 60Hz -totally enclosed, fan cooled.

Electrical Controls
Available as option.

Frame Capacity
Maximum load per linear foot with legs on 10 ft. centers = 1280 lbs.

 

Request More Information

Contact Us
Captcha