BCST-300 Slider and Roller Bed Belt Conveyor

Slider and Roller Bed Belt Conveyor – BCST- 300

BCST-300 (Medium Duty)

  • Welded Constuction
  • 5 1/2 in. formed 10 ga. channel frame
  • Belt Widths up to 48 in.
  • Drive packages available from 1/3 HP to 2 HP
  • Roller Bed: 1.9 in. dia. rollers with 7/16 in. hex shafts spaced on 6 in. centers.

 

BCST-300 Slider and Roller Bed Belt Conveyor

STANDARD SPECIFICATIONS:

Belt
Black Trackmate 120 EMB with clipper lace

Belt widths
6 in. to 48 in. in full one inch increments.

Bed
10 ga. slider bed pans welded in 5 1/2 in. deep x 10 ga. painted steel channel frames. Standard 5 FT. and 10 ft. long welded sections, with welded-in end couplers.

Floor Supports
3 in. structural channel legs with 4 in. of adjustment. Available up to 89 in. top of belt. One support at every bed joint and at the ends of conveyor

Drive Pulley
4 in. dia. with 1 3/16 in. dia. shaft or 8 in. dia. with 1 7/16 in. dia. shaft or 1 11/16 in. dia. shaft, crowned and fully lagged.

Tail Pulley
4 in. dia. with 1 3/16 in. dia. shaft, 6 in. dia. with 1 7/16 in. dia. shaft, crowned.

Snub Roller
2 1/2 in. dia. with grease packed ball bearings (Adjustable)

Return Rollers
1.9 in. dia. with grease packed bearings.

Take-Up
Provides belt take-up at tail pulley to allow for future belt stretch.

Bearings
Sealed, pre-lubricated, self-aligning ball bearings on drive and tail pulleys.

Conveyor Speed
Constant 60 FPM

Speed Reduction
Sealed worm gear "C" face flanged speed reducer.

Motor
1/2 HP - 230/460V - 3 phase - 60Hz -totally enclosed, fan cooled.

Electrical Controls
Available as option.

Frame Capacity
Maximum load per linear foot with legs on 10 ft. centers = 300 lbs.

 

Request More Information

Contact Us
Captcha

Upload PO