BCST-600 (Heavy Duty)
- Welded Constuction
- 7 1/2 in. formed 7 ga. channel frame
- Belt Widths 12" through 60"
- Drive packages available up to 5 HP
- Roller Bed: 2 1/2 in. dia. x 11 ga. rollers with 11/16 hex shafts spaced every 6 inches.
STANDARD SPECIFICATIONS:
Belt
Black Trackmate 120 EMB with clipper lace
Belt widths
12 in. to 60 in. in full one inch increments.
Bed
7 ga. slider bed pans welded in 7 1/2 in. deep x 7 ga. painted steel channel frames. Standard 5 FT. and 10 ft. long welded sections, with welded-in end couplers.
Floor Supports
4 in. structural channel legs with 4 in. of adjustment. Available up to 89 in. top of belt. One support at every bed joint and at the ends of conveyor.
Drive Pulley
8 in. dia. with 1 15/16 in. dia. shaft, 12 in. dia. with 1 15/16 in. dia. shaft or 2 3/16 in. dia. shaft, crowned and fully lagged.
Tail Pulley
6 in. dia. with 1 11/16 in. dia. shaft, 8 in. dia. with 1 11/16 in. dia. shaft, crowned.
Snub Roller
3 1/2 in. dia. with grease packed ball bearings (Adjustable)
Return Rollers
1.9 in. dia. or 2 1/2 in. dia. with grease packed bearings.
Take-Up
Provides belt take-up at tail pulley to allow for future belt stretch.
Bearings
Sealed, pre-lubricated, self-aligning ball bearings on drive and tail pulleys.
Conveyor Speed
Constant 60 FPM
Speed Reduction
Sealed worm gear "C" face flanged speed reducer.
Motor
230/460V - 3 phase - 60Hz -totally enclosed, fan cooled.
Electrical Controls
Available as option.
Frame Capacity
Maximum load per linear foot with legs on 10 ft. centers = 620 lbs.