cdtrc large

CDTRC – Chain Driven Tapered Roller Curve

The Model CDTRC is used to help maintain product orientation through a curve in the conveyor line. Tapered shells can accommodate a wide range of standard and custom radiuses, and can interface with our CDLR19, CDLR25, & CDLR26 models.

cdtrc large

CDTRC SPECIFICATIONS

EFFECTIVE WIDTH: 36", 42", 48", 54", 60"

DEGREES: 45°, 90°

BEGINNING ELEVATION: 6.75" - 120"

ENDING ELEVATION: 6.75" - 120"

SPEED: 10 - 120 FPM

ROLLER: 2-1/2" diameter at sprocket end. Roller diameter increases across width to provide true taper. 12ga wall tube with 11/16" hex cold rolled steel axles, spring retained. Standard bearings are precision, grease packed.

DRIVE: Standard drive is mounted high near center of conveyor length on chainbox side. Optional drives include drive mounted low or drive mounted below and within, near center.

FRAME: Standard frame includes 7” channel on chain box side and 5” channel on opposite side with roller set high in frame. Optional frame includes 8" channel on chain box side and 6" channel on opposite side with roller set high in frame.

MOTOR: 3/4 HP through 2 HP. Energy efficient and inverter duty motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60 and 575/3/60 & DC Voltage.

ROLLER COVERS: Standard roller surface is carbon steel.

SUPPORT CENTERS: Standard supports are floor supports on 10’ center.

FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

Request More Information

Contact Us
Captcha