FIND US
Davenport, IA
4710 N Brady St
Davenport, IA 52806
Des Moines, IA
2276 NE 46th Ave
Des Moines, IA 50317
Rubber Roll Up Doors
Rubber roll-up doors are high-performance industrial doors engineered with a ¼-inch-thick SBR rubber curtain, springless design, and breakaway bottom bar for high-cycle operation in manufacturing plants, warehouses, loading docks, transit facilities, and large-opening industrial environments. The Rytec PowerTec™ series includes motorized models with opening speeds from 18 to 48 inches per second, as well as a manually operated model for low-cycle applications. Available sizes range up to 30 feet wide by 30 feet high.
Barron Equipment sells, installs, and services Rytec PowerTec™ rubber roll-up doors throughout Iowa, Illinois, Nebraska, and parts of Wisconsin, Minnesota, and Missouri.
Why Choose an Industrial Rubber Roll-Up Door?
Rytec PowerTec™ doors use a heavy-duty SBR rubber curtain designed to withstand the impacts and operating demands found in busy industrial environments. Their springless construction eliminates torsion-spring counterbalance components, while the breakaway bottom bar releases following an accidental impact and can be reset to help minimize downtime.
Rubber roll-up doors can help facilities address:
- Accidental forklift and vehicle impacts
- Door-related operational downtime
- Maintenance associated with torsion-spring systems
- Frequent traffic through industrial openings
- Large or space-constrained door openings
- Environmental separation at loading docks and interior work areas
- Low-cycle openings without convenient electrical access
Rytec PowerTec™ Rubber Door Models
The PowerTec™ family includes four models designed for different opening sizes, clearance limitations, cycle requirements, and applications.
Rytec PowerTec™ SR
The Rytec PowerTec™ SR is designed for large openings and demanding industrial environments. It opens at speeds up to 48 inches per second and can accommodate openings up to 30 feet wide by 30 feet high. Its ¼-inch-thick SBR rubber curtain includes a breakaway bottom bar in safety yellow.
The SR uses Rytec’s springless System 4® control design, eliminating torsion-spring counterbalance maintenance. Standard safety features include dual thru-beam photo eyes and a wireless reversing edge. The model carries a limited lifetime rubber-panel warranty and a two-year limited motor, mechanical, and electrical warranty.
Best suited for:
- Large industrial openings
- Manufacturing facilities
- Warehouses and distribution centers
- Transit facilities
- Parking structures
- Automotive facilities
- Government operations
- Heavy-equipment storage and service areas
Rytec PowerTec™ Pro
The Rytec PowerTec™ Pro is a low-profile rubber roll-up door for facilities where headroom and side clearance are limited. Its 3.5-inch side columns require no more space than a standard rolling steel door. The Pro opens at speeds up to 18 inches per second and can accommodate openings up to 18 feet wide by 18 feet high.
The Pro uses a reinforced, ¼-inch-thick SBR rubber curtain with a published tensile strength of 2,000 psi. Breakaway tabs allow the bottom bar to release in either direction following an impact and reset quickly. The model carries a limited lifetime rubber-panel warranty and a two-year limited motor, mechanical, and electrical warranty.
Best suited for:
- Tight-space manufacturing environments
- Openings with limited side clearance
- Interior separation zones
- Warehouses and distribution facilities
- Transit applications
Rytec PowerTec™ SD
The Rytec PowerTec™ SD is designed specifically for loading-dock applications. It features a narrow side frame, reduced head-clearance requirements, dock-specific sealing components, and a heavy-duty SBR rubber curtain with a breakaway system.
The motorized PowerTec™ SD opens at speeds up to 18 inches per second and is available for openings up to 12 feet wide by 12 feet high. A manually operated configuration is also available for low-cycle dock locations.
Best suited for:
- Loading docks
- Openings with limited side clearance
- Dock areas requiring perimeter sealing
- Warehouses and distribution centers
- Industrial shipping and receiving operations
Rytec PowerTec™ MR
The Rytec PowerTec™ MR is a manually operated rubber roll-up door for low-cycle industrial environments that do not require a motor or electrical components. The door operates with a chain hoist and can accommodate openings up to 18 feet wide by 18 feet high.
The MR uses a ¼-inch-thick SBR rubber curtain with a breakaway bottom bar. Its narrow side columns make it suitable for openings where available space is limited.
Best suited for:
- Equipment-storage areas
- Interior separation zones
- Low-cycle manufacturing openings
- Facilities without electrical access
- Applications where manual operation is preferred
Which PowerTec™ Model Is Right for Your Application?
Use this guide to compare the four Rytec PowerTec™ models based on application, opening speed, maximum size, and primary design feature.
| Application | Recommended Model | Opening Speed | Maximum Size | Primary Design Feature |
|---|---|---|---|---|
| Large industrial openings | PowerTec™ SR | Up to 48 IPS | 30′ × 30′ | Springless high-speed design for large openings |
| Tight spaces with limited side clearance | PowerTec™ Pro | Up to 18 IPS | 18′ × 18′ | 3.5-inch low-profile side columns |
| Loading dock applications | PowerTec™ SD | Up to 18 IPS | 12′ × 12′ | Narrow frame and dock-specific seals |
| Low-cycle areas without electrical access | PowerTec™ MR | Manual | 18′ × 18′ | Chain-hoist operation with no motor required |
The SR is the high-speed, large-opening model. The Pro fits constrained spaces, the SD is designed for standard loading-dock applications, and the MR provides manual operation for low-cycle openings.
SBR Rubber Curtain Construction
PowerTec™ doors use a ¼-inch-thick SBR, or styrene-butadiene rubber, curtain. This material is engineered to resist punctures, tears, bumps, and rough industrial use. It is distinct from the PVC or vinyl curtains commonly found on fabric high-speed doors.
The flexible rubber curtain allows the door to tolerate routine industrial contact while the breakaway bottom bar helps limit damage when a forklift or vehicle accidentally strikes the door.
SBR Rubber Benefits
- Puncture- and rip-resistant construction
- Flexible performance in high-traffic environments
- Suitable for industrial impact conditions
- Compatible with breakaway door designs
- Available for openings as large as 30 feet by 30 feet
Springless Design
Traditional commercial doors frequently rely on torsion springs to counterbalance the weight of the door. Rytec PowerTec™ rubber doors use springless engineering, eliminating torsion-spring counterbalance components from the system.
This design helps reduce maintenance associated with:
- Torsion-spring wear
- Spring adjustments
- Broken spring components
- Counterbalance-system service
The PowerTec™ MR is also springless but operates manually with a chain hoist rather than a powered direct-drive system.
Breakaway Impact Recovery
PowerTec™ rubber doors include a breakaway bottom-bar system designed to release following accidental contact from a forklift or vehicle. The system helps reduce damage to the curtain and surrounding door components while allowing the door to be returned to service quickly.
This feature is especially valuable in:
- Forklift traffic lanes
- Loading docks
- Manufacturing facilities
- Distribution centers
- Heavy-equipment environments
- High-traffic warehouse openings
Impact recovery requirements vary by model and installation. Barron Equipment can help evaluate the door size, traffic direction, impact risk, and expected cycle count before recommending a configuration.
Safety Systems
Every motorized Rytec PowerTec™ model includes dual thru-beam photo eyes that monitor the opening and activate reverse-to-open operation when an obstruction is detected. A breakaway bottom bar in safety yellow provides added visibility and releases following contact to help limit door damage and downtime. A standard chain hoist allows manual operation during a power interruption.
The PowerTec™ SR includes a wireless reversing edge as standard equipment. This system uses two-way communication between the control box and bottom bar, eliminating the need for coil cords.
The Pathwatch® Safety Light System is available as an optional safety enhancement on the SR and Pro. It provides a visual warning to vehicle operators and pedestrians approaching the door zone.
Interior and Exterior Applications
PowerTec™ rubber doors can support several types of industrial openings, but model selection should account for the environment as well as the opening dimensions.
Large Exterior or Industrial Openings
The PowerTec™ SR supports openings up to 30 feet by 30 feet and provides opening speeds up to 48 inches per second. It is suited to facilities requiring rapid operation across a large opening.
Space-Constrained Openings
The PowerTec™ Pro uses 3.5-inch side columns and fits within the footprint of many conventional rolling steel door systems.
Loading Docks
The PowerTec™ SD is configured for dock openings requiring narrow side frames, limited head clearance, and dock-specific seals.
Low-Cycle Interior Openings
The PowerTec™ MR is suited to equipment storage and area-separation applications that do not need powered, high-cycle operation.
Industries and Applications
Manufacturing Facilities
Rubber roll-up doors support frequent equipment movement, large openings, and demanding operating conditions.
Warehouses and Distribution Centers
High-speed operation can improve forklift traffic flow and reduce the amount of time an opening remains exposed.
Loading Docks
Dock-specific rubber doors provide impact recovery, perimeter sealing, and configurations designed around common dock dimensions.
Transit and Heavy-Equipment Facilities
Large-opening models can accommodate buses, trucks, industrial equipment, and fleet-maintenance operations.
Parking and Automotive Facilities
Rubber roll-up doors provide high-cycle operation and impact resistance at frequently used vehicle openings.
Interior Area Separation
Manual or powered rubber doors can separate equipment-storage areas, production zones, and other industrial spaces.
Selection Assistance and Installation
Barron Equipment sells, installs, programs, and services Rytec PowerTec™ rubber roll-up doors throughout Iowa, Illinois, Nebraska, and parts of Wisconsin, Minnesota, and Missouri, with locations in Davenport and Des Moines.
To help Barron identify the right model, provide:
- Opening width and height
- Available side and head clearance
- Interior or exterior location
- Primary traffic type
- Estimated daily cycle count
- Loading-dock or large-opening requirements
- Availability of electrical service
- Environmental and sealing requirements
The PowerTec™ SR, Pro, and SD are custom-configured around the opening and application.
Frequently Asked Questions
What is a rubber roll-up door?
A rubber roll-up door is a high-performance industrial door constructed with a heavy-duty rubber curtain, springless design, and breakaway bottom bar. Rytec PowerTec™ models are designed for manufacturing facilities, warehouses, loading docks, transit operations, and other industrial environments where impact resistance and dependable operation are priorities.
How is a rubber roll-up door different from a standard commercial overhead door?
Standard commercial overhead doors commonly use rigid sectional panels and torsion-spring counterbalance systems. PowerTec™ rubber roll-up doors use a flexible SBR rubber curtain and springless construction. The powered SR model opens at speeds up to 48 inches per second.
What is the difference between the PowerTec™ SR and PowerTec™ Pro?
The PowerTec™ SR is designed for large openings and faster operation. It opens at up to 48 inches per second and accommodates openings up to 30 feet by 30 feet. The PowerTec™ Pro is a low-profile model with 3.5-inch side columns, an opening speed up to 18 inches per second, and a maximum size of 18 feet by 18 feet.
Which rubber roll-up door is best for a loading dock?
The PowerTec™ SD is designed specifically for loading-dock applications. It has a narrow side frame, reduced head-clearance requirements, dock-specific seals, an opening speed up to 18 inches per second, and a maximum size of 12 feet by 12 feet. For larger openings, the PowerTec™ SR accommodates sizes up to 30 feet by 30 feet.
What safety systems are included on PowerTec™ doors?
Motorized PowerTec™ models include dual thru-beam photo eyes, a high-visibility breakaway bottom bar, and a chain hoist for manual operation during a power interruption. The PowerTec™ SR also includes a wireless reversing edge as standard equipment. Pathwatch® visual warning technology is available as an optional safety enhancement on the SR and Pro.
Does Barron Equipment install rubber roll-up doors?
Yes. Barron Equipment provides product selection, installation, programming, and ongoing service for Rytec PowerTec™ rubber roll-up doors throughout Iowa, Illinois, Nebraska, and parts of Wisconsin, Minnesota, and Missouri.
Need Help Selecting a Rubber Roll-Up Door?
Whether your facility needs a high-speed door for a large industrial opening, a low-profile model for limited clearance, a dock-specific system, or a manually operated door for a low-cycle location, Barron Equipment can help identify the right Rytec PowerTec™ model.