Overview
Some food processing and packaging environments require more than dry-wipe sanitation. When production areas involve moisture, wet ingredients, or wipe-down cleaning procedures, the conveyor system needs to tolerate those conditions without corrosion, belt degradation, or bearing failure. The Dorner AquaGard 7200 is a sanitary belt conveyor built entirely from 304 stainless steel and FDA-approved components, rated specifically for wipe-down and wet environment operation.
Where the AquaGard 7100 uses flexible chain technology for complex layouts with curves and elevation changes, the 7200 takes a different approach — delivering a low-profile, single-piece belted frame that prioritizes fast belt changes, precise tracking, and streamlined cleaning in straight-run applications. Its compact design fits into tight spaces that other sanitary conveyors cannot, making it a strong fit for inline processing, inspection stations, and packaging lines where floor space is limited.
Features and Specifications
The AquaGard 7200 is engineered around a sleek, roll-formed stainless steel frame that minimizes horizontal surfaces and eliminates the recesses where food particles and moisture can collect. Every design decision — from the V-groove belt tracking system to the self-aligning sealed bearings — supports fast sanitation and reliable daily operation in wet conditions.
- Construction: 304 stainless steel frame, head and tail plates polished to a #4 finish; complete stainless steel construction throughout
- Frame Gauge: 11-gauge stainless steel roll-formed frame
- Belt Widths: 1.75″ to 18″
- Conveyor Lengths: 2 ft. to 18 ft.
- Load Capacity: Up to 60 lbs.
- Belt Speed: Up to 264 ft/min
- Belt Change: Quick five-minute belt change for maximum uptime
- Belt Tensioning: Rack and pinion system for fast, single-point adjustment
- Belt Tracking: V-groove frame with V-guided belt ensures accurate, consistent tracking
- Bearings: Self-aligning stainless steel sealed bearings with FDA-approved solid lubricant
- Drive Pulley: 1.25″ diameter, turning approximately 4.25″ of belt per revolution
- Profile: 1.5″ from bottom of frame to top of belt
- Gearmotors and Controls: Washdown rated
- Models: End drive and cleated drive configurations available
- Configuration: Straight sections only
- Belting: Variety of FDA-approved belt options to match application requirements
Designed for Fast Sanitation and Maximum Uptime
In food and beverage environments, every minute of downtime during cleaning cuts into production capacity. The AquaGard 7200 addresses this directly with its five-minute belt change — operators can remove and replace the belt without tools or extended disassembly, getting the line back into production faster than conventional sanitary conveyors allow.
The single-piece, low-profile frame design eliminates the joints, crevices, and trapped spaces that complicate cleaning on multi-piece conveyor frames. The rack-and-pinion belt tensioning system provides single-point adjustment, so belt tension can be set quickly and consistently after every belt change or cleaning cycle. The optional bottom wiper at 0.25″ thickness helps keep the underside of the belt free of debris during operation.
The quick-clamp rail system allows bolt-on accessories like guides and side rails to be mounted and repositioned without drilling or permanent modification to the frame, supporting fast changeovers between product runs.
Applications and Industries
The AquaGard 7200 is purpose-built for straight-line conveying in environments where products or processing conditions involve moisture. Common applications include baking lines where products move between processing and packaging, snack food production where loose product requires a belted surface, confectionery handling where sticky or coated items need positive belt contact, secondary packaging stations that process sealed or wrapped products, bottling line infeeds and outfeeds, and pet food processing where wet ingredients are present.
Industries that deploy the 7200 include food and beverage processing, bakery and snack production, confectionery manufacturing, pharmaceutical and nutraceutical packaging, pet food production, and consumer goods packaging. Barron Equipment works with processing operations across these sectors to specify, install, and maintain sanitary conveyor systems that meet production and sanitation requirements.
AquaGard 7200 vs. 7100: Which Model Fits Your Application?
Both the 7200 and 7100 are Dorner sanitary conveyors built with stainless steel and FDA-approved materials, but they serve different layout and product handling needs. The 7200 is a belted conveyor available in straight sections only, rated for wipe-down and wet environments, with a low-profile frame and fast belt changes. The 7100 is a flexible chain conveyor that supports multiple curves, inclines, declines, and powered transfers on a single frame, designed primarily for dry food processing with higher load capacity.
Choose the 7200 when your application requires a belted surface, wet-environment tolerance, fast sanitation, and a compact straight-line footprint. Choose the 7100 when your layout demands curves, elevation changes, or higher load capacity in a dry processing environment. Barron Equipment can help you evaluate both options based on your specific product, facility, and sanitation requirements.
Selection and Configuration Assistance
Configuring the right AquaGard 7200 starts with the product being conveyed — its weight, dimensions, surface characteristics, and the processing environment it passes through. Belt selection, conveyor width, length, speed, and drive configuration are all determined during the specification process. Barron Equipment’s conveyor specialists work with food processing and packaging operations to recommend the right 7200 configuration and ensure it integrates properly into the production line.
Request a quote today to discuss your sanitary conveyor requirements with a Barron Equipment specialist.