BEA-PUSH-PLATE.png
BEA-PUSH-PLATE.png BEA-PUSH-PLATE-4.png BEA-PUSH-PLATE-5.png BEA-PUSH-PLATE-6.png BEA-PUSH-PLATE-7.png BEA-PUSH-PLATE-2.png BEA-PUSH-PLATE-3.png BEA-PUSH-PLATE-12.png BEA-PUSH-PLATE-13.png BEA-PUSH-PLATE-14.png BEA-PUSH-PLATE-8.png BEA-PUSH-PLATE-9.png BEA-PUSH-PLATE-10.png BEA-PUSH-PLATE-11.png BEA-PUSH-PLATE-17.png BEA-PUSH-PLATE-18.png BEA-PUSH-PLATE-19.png BEA-PUSH-PLATE-15.png BEA-PUSH-PLATE-16.png

BEA Push Plates and Activation Devices for Automatic Doors

Item ID: BEA-PUSH-PLATE Category

Lead Time: 3 days

BEA push plate assemblies and packages for automatic door activation. Round, vertical bar, vestibule, and jamb mount styles. Wired and wireless 300 MHz options.

From $3.42

Overview

Automatic doors need a way for people to tell them to open. Motion sensors handle hands-free activation, but many entrances — especially ADA-accessible entrances — also need a push plate: a clearly marked, easy-to-reach surface that a person presses to trigger the door operator. Push plates are required at entrances where the automatic door doesn’t open on motion alone, and they’re the standard means of activation for people using wheelchairs, walkers, or other mobility aids.

BEA’s push plates improve overall access, enhance accessibility for those with limited mobility or disabilities, and seamlessly integrate with an automatic door’s activation. The Panther Family consists of wireless technology integrated into round and square push plates, with an integrated wireless transmitter and mounting box that reduces installation time by eliminating the need to run wires from the push plate or use additional mounting hardware.

Barron Equipment stocks a range of BEA push plates, actuation bars, adapter accessories, and complete push plate packages for commercial automatic door systems.

Available Products

10EMR6 — BEA Panther 6″ Round Push Plate, Push to Open

A 6-inch round stainless steel push plate with “Push to Open” text, part of BEA’s Panther Series with integrated wireless technology. This panther plate can be activated by pushing on any part of it, thanks to the all-active faceplate design. The Panther Family offers IP65-rated housing that creates a weather-resistant barrier, enabling the push plates to be mounted in outdoor environments or wash-down applications. Concealed fasteners minimize vandalism risk.

10LPR36-300 — BEA 36″ Wireless Actuation Bar

A 36-inch vertical low-profile actuation bar with a built-in 300 MHz wireless transmitter. The extended vertical format provides a large activation surface that can be reached at any height — from wheelchair users to standing adults — without requiring precise aim. The wireless transmitter eliminates hardwiring between the bar and the door operator, simplifying installation in retrofit applications or locations where running wire isn’t practical.

50-5016 — BEA Vestibule Plate Adapter Ring

An adapter ring that enables push plate mounting in vestibule configurations on automatic door systems. When the entrance has a vestibule (an enclosed area between two sets of doors), the push plates on the inner doors need to be positioned to activate the correct door without interfering with the adjacent door’s system. The adapter ring provides the mounting interface for these configurations.

PUSHPLATE2 — BEA Push Plate 2 Package

BEA’s push plate packages are all-in-one solutions containing push plates, wireless transmitters and receivers, and mounting options. The Push Plate 2 package is a complete activation kit for automatic door operator systems with mounting hardware included — everything needed to add push plate activation to a door in a single box.

PUSHPLATE4 — BEA Jamb Push Plate 4 Package

A complete jamb-mount push plate activation kit. BEA’s jamb push plates can be mounted in areas with limited space available, such as on guide rails, making them the right choice when wall space beside the door is limited or obstructed. The jamb-mount format positions the plate on the door frame itself rather than on the adjacent wall. This package includes hardware for a complete installation.

Hardwired vs. Wireless Installation

BEA push plates can be connected to the automatic door operator in two ways. Hardwired installation runs a low-voltage wire from the push plate directly to the door operator’s control board. It’s the most reliable connection method and doesn’t depend on batteries or wireless signal, but it requires routing wire through or along the wall — which adds installation time, especially in finished spaces where the wire needs to be concealed.

Wireless compatibility reduces installation time by eliminating the need to run wires from the push plate or use additional mounting hardware. This offers greater mounting flexibility in areas where hardwired push plates cannot be mounted. The wireless push plates transmit a radio signal to a receiver connected to the door operator. The 36″ actuation bar uses a built-in 300 MHz transmitter. The Panther plates are available with integrated wireless at various frequencies.

ADA Compliance and Accessibility

The Americans with Disabilities Act (ADA) requires that accessible entrances provide a means of activation that can be operated with one hand, without tight grasping, pinching, or twisting, and with no more than 5 pounds of force. BEA push plates meet these requirements. The all-active faceplate design means the entire surface responds to pressure — there’s no specific button to find and press. The 6-inch round plates and 36-inch vertical bars provide large, clearly identified activation surfaces that are easy to reach and operate for people with a wide range of physical abilities.

Facility managers, building owners, and contractors installing or upgrading automatic door entrances should confirm that the push plate mounting height and location meet current ADA Accessibility Guidelines (ADAAG) for the specific entrance configuration.

Applications

BEA push plates are used on automatic sliding doors, automatic swing doors, and automatic folding doors in commercial and institutional settings. Common installations include hospitals and medical facilities, retail storefronts, office buildings, government buildings, schools and universities, airports and transit stations, and any public entrance required to meet ADA accessibility standards. The push plates work with all major automatic door operator brands and can be added to existing automatic door systems as upgrades or replacements.

Selection Assistance

Selecting the right push plate depends on the entrance configuration, the mounting location, and whether hardwired or wireless installation is preferred. For standard wall-mount installations with space beside the door, the Panther 6″ round plate or the Push Plate 2 package provides a complete solution. For narrow jamb-mount locations, the Push Plate 4 jamb package fits where wall-mount plates can’t. For extended vertical reach at any height, the 36″ actuation bar covers the full range. For vestibule entrances, pair any push plate with the 50-5016 adapter ring. Contact Barron Equipment for help selecting the right BEA push plate for your automatic door application.

Product Specification

Model

36" Vertical Bar, Wireless 300 MHz, Jamb Push Plate 4 Package, Panther 6" Round, Push to Open, Push Plate 2 Package, Vestibule Plate Adapter Ring

FAQs

Do push plates work with any automatic door operator?

BEA push plates are compatible with all major automatic door operator brands. Hardwired plates connect to the operator's activation input terminals. Wireless plates communicate through a receiver that connects to the same terminals. Confirm the operator accepts a dry-contact activation input (virtually all do) and select the matching wireless frequency if using wireless plates.

Do wireless push plates need batteries?

Yes. Wireless push plates with integrated transmitters are battery-powered. Battery life varies by model and usage frequency but typically lasts several years under normal commercial use. The receiver at the door operator is typically hardwired to low-voltage power.

Can I mix hardwired and wireless plates on the same door?

Yes. Each push plate is an independent activation device. A door can have a hardwired plate on one side and a wireless plate on the other, or multiple plates of either type. Each one sends an independent "open" signal to the operator.

What's the difference between the Push Plate 2 and Push Plate 4 packages?

The Push Plate 2 is a standard wall-mount package — the plates mount on the wall beside the door. The Push Plate 4 is a jamb-mount package — the plates mount directly on the door frame, designed for locations where wall space is limited. Both are complete kits with plates, wireless components, and mounting hardware.

Are these push plates rated for outdoor use?

The Panther Series plates are IP65-rated, making them suitable for outdoor installation and wash-down environments. Confirm the IP rating on the specific model being considered if outdoor mounting is required.

Request a Quote

Contact Us

Summary

Captcha

Upload PO

5% Off All Stronghold Cabinets