Overview
The DoorKing 1200-007 is a three-button interior control station for manual operation of compatible automated vehicular gates. Dedicated Open, Close and Stop buttons give authorized users straightforward control of the gate from a protected indoor location.
The 1200-007 is designed specifically for DoorKing 6050, 6100 and 6300 Series gate operators. These operators use a three-wire logic arrangement that matches the control station.
DoorKing 1200-007 Interior Control Station
This compact control station mounts into a standard single-gang electrical box and provides three color-coded buttons for gate operation. All switch contacts are dry-contact, normally open connections.
- Three-button interior gate control station
- Open, Close and Stop functions
- For DoorKing 6050, 6100 and 6300 Series operators
- Three-wire logic
- Dry-contact, normally open switches
- Mounts in a standard single-gang electrical box
- Designed for protected interior locations
Manual Gate Control
The 1200-007 provides a dedicated control point for manually commanding a compatible vehicular gate. Separate Open, Close and Stop buttons allow the gate to be operated without relying on a transmitter, keypad or other access credential.
This makes the station useful at guarded entrances, security areas and other locations where authorized personnel need direct control over gate movement.
Operator Compatibility
Compatibility is especially important with the 1200-007. DoorKing specifies this control station for the 6050, 6100 and 6300 Series operators only.
Other DoorKing gate operators use different control-station models. Confirm the gate operator model before ordering rather than selecting a three-button station based only on appearance or button functions.
Selection Assistance
Barron Equipment offers control stations and accessories for commercial gate operator systems. Before selecting the 1200-007, verify that the installed operator is a compatible DoorKing 6050, 6100 or 6300 Series model.
For other DoorKing operators, select the control station specified for that operator’s control logic and wiring requirements.





