DK-PART.png
DK-PART.png DK-PART-4.png DK-PART-5.png DK-PART-6.png DK-PART-7.png DK-PART-1.png DK-PART-2.png DK-PART-3.png

DoorKing Gate Operator Replacement Parts

Item ID: DK-PART Category

Lead Time: 5 days

DoorKing replacement parts for gate and barrier operators. Motors, bearings, belts, shafts, resistors, and hardware for 9100/9150 series.

From $4.24

Overview

DoorKing replacement parts support the repair and maintenance of compatible slide, swing and other gate operator systems. Available components include motor assemblies, drive belts, bearings, shaft assemblies, electrical resistors, locks, insulators and miscellaneous mechanical hardware.

Select replacement parts by matching the existing DoorKing operator model and original component number. Similar-looking belts, shafts, bearings and electrical components should not be assumed interchangeable between operators.

Available Products

DoorKing 2600-162 1 HP Motor Assembly

1 HP replacement motor assembly for select DoorKing commercial and industrial gate operators. Verify the operator model and motor requirements before replacement.

DoorKing 2600-429 Cogged Belt

Replacement cogged drive belt for compatible DoorKing gate operators. Designed to restore proper power transmission when the existing belt is worn or damaged.

DoorKing 2600-440 Bearing

Replacement bearing used in compatible DoorKing slide gate operator assemblies. Confirm the operator model and bearing position before ordering.

DoorKing 2600-466 Rear Bearing Assembly for 9100/9150

Rear bearing assembly for DoorKing 9100 and 9150 slide gate operators. Supports proper alignment and movement of the operator drive assembly.

DoorKing 2600-688 17 in. 4L170 Cogged Belt

17 in. 4L170 cogged replacement belt for compatible DoorKing operator drive systems. Match the belt designation to the existing component before installation.

DoorKing 2600-694 AX36 Belt

AX36 replacement drive belt for compatible DoorKing operator systems. Designed to restore reliable power transfer within supported drive assemblies.

DoorKing 2600-767 Brass B745C Padlock

Brass B745C replacement padlock for compatible DoorKing equipment and enclosure applications. Confirm the required lock type before ordering.

DoorKing 2600-847 1 Ohm 65 Watt Power Resistor

Replacement 1-ohm, 65-watt power resistor for compatible DoorKing electrical applications. Match resistance, wattage and operator requirements exactly.

DoorKing 2600-848 1 Ohm 30 Watt Power Resistor

Replacement 1-ohm, 30-watt power resistor for compatible DoorKing operator circuits. Do not substitute the 65-watt version without confirming the electrical requirements.

DoorKing 2600-903 Main Shaft Assembly

Replacement main shaft assembly for select DoorKing gate operator systems. Confirm exact operator compatibility before replacing the existing shaft assembly.

DoorKing 2600-904 Main Shaft Assembly

OEM-style replacement main shaft assembly for select DoorKing gate operators. Designed to restore proper mechanical drive function in compatible systems.

DoorKing 2600-917 Jam Nut Magnet Sub-Assembly

Jam nut magnet sub-assembly for DoorKing 910 and 915 gate operator systems. Supports the operator’s magnetic sensing function for consistent position detection.

DoorKing 2600-945 Plastic Insulator Cover

Replacement plastic insulator cover for compatible DoorKing operator electrical components. Confirm placement and operator compatibility before installation.

DoorKing 2600-990 Neoprene Washer

Replacement neoprene washer measuring approximately 1.5 in. x 0.725 in. x 0.125 in. for compatible DoorKing equipment assemblies.

Choosing the Correct DoorKing Replacement Part

Start with the DoorKing operator model and existing component number. Replacement parts should match the mechanical or electrical specifications of the original component rather than being selected by appearance alone.

For mechanical components, verify belt size, shaft assembly, bearing location and drive configuration. For electrical components, match resistance, wattage, motor horsepower and other required electrical specifications.

Repair and Maintenance

Drive belts, bearings and shaft assemblies are wear-related mechanical components that can affect operator movement when damaged or worn. Motors, resistors and sensing components can affect powered operation and control performance.

After replacement, test the complete operator for proper gate travel, limits, safety-device response and normal operation before returning the gate to service.

Selection Assistance

Barron Equipment offers DoorKing replacement parts for commercial and residential gate operator systems. Before ordering, identify the operator model and original DoorKing part number whenever possible.

If the original part number cannot be confirmed, use the operator model, manufacturing information and parts diagram to identify the correct replacement. Do not substitute belts, resistors, bearings or shaft assemblies without verifying compatibility.

Product Specification

Type

Bearing, Bearing Assembly Rear 9100/9150, Belt, 17" 4L170 Cogged, Belt, AX36, Belt, Cogged, Cover Plastic Insulator, Jam Nut Magnet Sub-Assy 910/915, Lock Padlock Brass B745C, Main Shaft Assembly, Motor Assembly, 1 HP, Resistor Power 1 Ohm 30W, Resistor Power 1 Ohm 65W, Washer Neoprene

FAQs

How do I choose the correct DoorKing replacement part?

Match the existing operator model and original DoorKing part number. Mechanical dimensions and electrical specifications should also match the component being replaced.

Which operators use the 2600-466 rear bearing assembly?

The 2600-466 rear bearing assembly is identified for DoorKing 9100 and 9150 slide gate operators.

What is the difference between 2600-847 and 2600-848?

Both are 1-ohm power resistors, but 2600-847 is rated at 65 watts while 2600-848 is rated at 30 watts. Use the wattage specified for the operator circuit.

What is the 2600-917 used for?

The 2600-917 jam nut magnet sub-assembly is designed for DoorKing 910 and 915 gate operator systems and supports the magnetic sensing function.

Are 2600-903 and 2600-904 interchangeable?

Do not assume so. They are different DoorKing main shaft part numbers and should be matched to the exact operator application.

What type of belt is the 2600-688?

The 2600-688 is identified as a 17 in. 4L170 cogged belt.

What type of belt is the 2600-694?

The 2600-694 is an AX36 replacement belt for compatible DoorKing operator systems.

Should a gate operator be tested after repair?

Yes. Check gate travel, limits, manual operation and all required safety devices after replacing a mechanical or electrical operator component.

Request a Quote

Contact Us

Summary

Captcha

Upload PO

5% Off All Stronghold Cabinets