Overview
The ZLS2‑35 is a low profile lift table engineered for true floor‑level loading. Its ultra‑thin low profile lift allows pallets to be set directly on the deck with a hand pallet truck, so you avoid pits, ramps, and forklift handoffs that add time and risk.
Raise loads to a safe work height in seconds. Operators complete labeling, wrapping, or light assembly with less bending and fewer extended reaches, which helps maintain pace through the shift and improves task quality.
Compared with taller platforms, this low lift start height removes extra steps that slow changeovers. Place the pallet, lift to the target height, and work from any side with clear access. In tight aisles or mixed‑load areas, the near‑floor start turns loading into a repeatable motion that supports consistent throughput.
Features & Benefits
This model functions as an electric lift table and delivers smooth, controlled travel to the set lifting height. The thin platform design improves edge access and keeps cycle times predictable, while a reinforced frame and guided scissor set provide stable lifting at rated load capacity.
For washdown or sanitary spaces, choose stainless steel construction. The finish resists moisture, cleans quickly, and meets hygiene expectations for food, pharma, or cleanroom work. In general industry, painted steel versions offer long service life with minimal upkeep.
Because it is a compact scissor lift table, the ZLS2‑35 fits where standard lift tables sit too high for floor loading or require ramps that consume space. The electric power unit reduces manual effort and helps crews hold line speed during busy periods.
| Platform Size (in.) | Raised Height (in.) | Lowest Height (in.) | Load Capacity (lbs.) | Rise Time |
|---|---|---|---|---|
| 50 x 48 | 35.375 | .375 | 2,000 | 45 Seconds |
Applications
Use the ZLS2‑35 wherever floor‑level loading and precise height control are priorities.
- Assembly cells: set parts at ideal work height for accurate, repeatable builds.
- Packing and shipping: load with a hand pallet truck, then lift to wrap, weigh, or label.
- Manufacturing: stage WIP, totes, and fixtures at consistent elevations for line balance.
- Food/pharma: select stainless steel to support hygiene and fast cleanup.
- Warehousing: handle mixed cartons where pits or ramps are impractical.
The very low lift start height reduces awkward motions and helps operators sustain output with less fatigue.
Maintenance
Daily care is straightforward. Keep the deck clear of debris and confirm smooth up/down motion with a positive stop at the set lifting height. Inspect cables, hoses, and scissor pivots on a routine schedule, and lubricate guides and pivots per the service plan. On stainless steel units, rinse and wipe surfaces to protect the finish and speed sanitation. With basic attention, the table delivers reliable service across long shifts and varied loads.
Selection Assistance
Match the table to your process and space. Confirm load capacity, required lifting height, and deck size, and review how you load—direct floor placement or hand pallet truck—along with aisle width and approach paths. Choose stainless steel if you need washdown or corrosion resistance. If your layout calls for a specialized deck or fixtures, ask about custom platform design options.
Not sure which low profile lift is the best fit? Barron Equipment can compare lift tables by capacity, duty cycle, and footprint, and then recommend the right material handling solution for your station layout and pace.