Overview
GTO/Linear PRO gate access and detection accessories provide keyless entry, hands-free vehicle exit, obstruction detection and driveway monitoring for compatible automatic gate systems.
Available options include a wireless digital keypad, wired exit wands with multiple cable lengths, wireless vehicle detection, dual-beam infrared photo eyes and a driveway alarm system. Select the device according to whether the application requires access control, vehicle activation, safety sensing or notification.
Available Products
GTO F310 Wireless Digital Gate Keypad
Wireless programmable keypad for PIN-based access with compatible GTO/Linear PRO and Mighty Mule gate systems. Supports up to 25 individual four-digit PINs with an approximate 30 to 50 ft. wireless operating range.
GTO FM139 Vehicle Sensor Exit Wand – 50 ft. Cable
Wired electromagnetic exit wand with 50 ft. cable for hands-free gate activation. Detects moving vehicles within an adjustable 3 to 12 ft. radius and signals a compatible gate operator to open.
GTO FM140 Vehicle Sensor Exit Wand – 100 ft. Cable
Wired vehicle detection wand with a 100 ft. cable for installations requiring additional distance between the sensor and gate operator. Uses electromagnetic sensing for hands-free vehicle activation.
GTO FM141 Vehicle Sensor Exit Wand – 150 ft. Cable
Extended-length wired exit wand with a 150 ft. direct-burial cable. Detects moving metal vehicles within an adjustable sensing area and provides an activation signal to compatible gate controls.
GTO R4222 Photoelectric Dual-Beam Detector
Through-beam infrared photo eye system for non-contact gate obstruction detection. The dual-beam design helps detect people, vehicles or other obstructions in the gate path and can signal a compatible operator to stop or reverse.
GTO R4450 Wireless Driveway Alarm Kit
Wireless driveway vehicle alert system that uses an electromagnetic sensor to detect moving vehicles and signals an indoor receiver from up to approximately 400 ft. away. Designed for driveway notification rather than automatic gate safety sensing.
GTO R4500 Wireless Vehicle Exit Wand Sensor
Wireless electromagnetic exit sensor for hands-free vehicular gate opening without running a long sensor cable back to the operator. Provides adjustable 3 to 12 ft. vehicle detection and an approximate 100 ft. wireless range.
Choosing the Right Gate Access or Detection Device
Choose the F310 when users need PIN-based gate access. For automatic vehicle exits, select FM139, FM140 or FM141 according to the required cable distance, or use R4500 where a compatible wireless installation is preferred.
R4222 serves a different purpose as a non-contact obstruction detection device. R4450 is a vehicle notification system that alerts occupants when a vehicle enters or exits the driveway.
Wired Vehicle Exit Wands
FM139, FM140 and FM141 use electromagnetic sensing to detect metal vehicles in motion. The primary difference between these models is cable length: 50 ft. for FM139, 100 ft. for FM140 and 150 ft. for FM141.
The sensor can detect vehicles within an adjustable 3 to 12 ft. radius. Exit wands are intended to activate the gate for vehicles leaving the property and should not be used as entrapment protection or another required safety device.
Wireless Vehicle Detection
R4500 provides an alternative to long direct-burial cable runs. Its wireless design combines an electromagnetic sensor with transmitter and receiver components to signal compatible vehicular gate systems.
R4450 also uses electromagnetic vehicle detection, but its purpose is notification rather than automatic exit activation. When a vehicle is detected, the indoor receiver sounds an alert.
Safety and Obstruction Detection
R4222 uses through-beam infrared sensing across the gate opening. When the beams are interrupted by a person, vehicle or other obstruction, the connected gate system can respond according to its configured safety logic.
Exit wands and driveway alarm sensors do not replace required gate entrapment protection. Safety devices should be selected and installed according to the gate operator and complete system requirements.
Selection Assistance
Barron Equipment offers GTO/Linear PRO access and detection accessories for automatic gate systems. Before ordering, determine whether the application requires authorized entry, automatic vehicle exit, obstruction detection or driveway notification.
For wired exit sensing, select the correct cable length before installation. For wireless products, confirm operating range and site conditions. Always verify accessory compatibility with the gate operator and control board.

























