Overview
GTO/Linear PRO replacement boards and control boxes support the repair of compatible swing gate operators and related access-control equipment. Available components include rev counter boards, retrofit main logic boards, electric gate lock controls, exit-wand electronics and complete or empty SW2000XLS control boxes.
Select electronic replacement parts by exact part number and operator series. XL and XLS systems use different board configurations, so similar-looking components should not be assumed interchangeable.
Available Products
GTO R4192 Rev Counter Board – SW2000XLS
Replacement rev counter board for the GTO/PRO SW2000XLS Series. Tracks motor revolutions to support accurate gate movement and positioning.
GTO R4918 Rev Counter Board – SW3000XLS / SW4000XLS
Replacement rev counter board for GTO/Linear PRO SW3000XLS and SW4000XLS gate operators. Designed as a model-specific electronic replacement for compatible XLS systems.
GTO RVCTBD3040 Rev Counter Board
Replacement rev counter board for select older GTO/Linear PRO operators, including SW2000XL, SW3000 and SW4000-series applications. Verify the exact operator generation before ordering.
GTO RVCTBDXL Rev Counter Board
Replacement rev counter board for compatible XL-series gate operators. This is an older-generation component and should be matched by exact operator model and existing board number.
GTO R5211 Retrofit Replacement Control Board
Retrofit main control board with updated firmware that replaces the older R4211. Compatible applications include select Mighty Mule FM500/FM502 and GTO PRO 2000XL, 3000XL, 4000XL and older PRO operator systems.
GTO LOCKPCB Automatic Gate Lock Control Board
Replacement electronic control board for compatible GTO/Mighty Mule automatic vehicular gate lock systems. Designed to restore proper electric gate lock control when the existing board fails.
GTO REWPOTPCB-01 Exit Wand PC Board with Tuning Pot
Replacement circuit board for compatible GTO/PRO vehicle sensor exit wands. The integrated tuning potentiometer allows sensitivity adjustment for reliable vehicle detection.
GTO PRO2000XLSCBOX Loaded Control Box
Loaded replacement control box for compatible 2000XLS Series gate operators. Provides a preassembled control-box option when the enclosure and internal control components need replacement.
GTO PRO2000XLSCBOXASYMT Empty Control Box
Empty replacement control-box enclosure for compatible 2000XLS Series systems. Designed for applications where the existing electronics can be transferred or the enclosure needs to be assembled in the field.
Choosing the Correct Replacement Board
Start with the gate operator model and the part number printed on the existing board. SW2000XLS, SW3000XLS and SW4000XLS systems use model-specific rev counter boards, while older XL-series operators may require a different component.
Do not select a control board solely by connector layout or appearance. Operator generation, firmware and accessory requirements can affect compatibility.
Rev Counter Boards
Rev counter boards monitor actuator or motor movement so the gate control system can track travel accurately. A failed or incompatible rev counter board can interfere with proper gate movement and positioning.
R4192 is designed for SW2000XLS applications, while R4918 supports SW3000XLS and SW4000XLS. Older XL-series operators use different rev counter components.
Loaded vs. Empty Control Boxes
The PRO2000XLSCBOX is a loaded control box for compatible 2000XLS operators and is intended when the control enclosure and installed components need replacement as an assembly.
The PRO2000XLSCBOXASYMT is the empty enclosure option. Choose the empty box when the existing electronics remain serviceable or when the components will be installed separately.
Selection Assistance
Barron Equipment offers GTO/Linear PRO replacement electronics for swing gate operators and related access-control equipment. Before ordering, confirm the operator model, XL or XLS generation and original electronic component number.
For rev counter repairs, match the board precisely to the operator series. For broader control-system replacement, identify whether the application requires a main logic board, accessory control board or complete control enclosure.






























