GTO-ARM.png
GTO-ARM.png GTO-ARM-3.png GTO-ARM-4.png GTO-ARM-5.png GTO-ARM-1.png GTO-ARM-2.png GTO-ARM-9.png GTO-ARM-10.png GTO-ARM-11.png GTO-ARM-12.png GTO-ARM-6.png

GTO/Linear PRO Swing Gate Replacement Operator Arms

Item ID: GTO-ARM Category

Lead Time: 1 weeks

GTO replacement operator arms for swing gate openers. 6 ft and 40 ft cable lengths for single and dual gate applications.

From $738.73

Overview

GTO/Linear PRO replacement operator arms provide powered actuation for compatible SW2000, SW3000 and SW4000-series swing gate systems. Available configurations include primary arms for single-gate applications and secondary or slave arms with longer cables for dual swing gates.

Select the replacement arm by matching the exact operator series, XL or XLS generation, single or dual-gate configuration and required cable length. Similar-looking actuator arms should not be assumed interchangeable.

Available Products

GTO PRO2000ARMXL Arm with 6 ft. Cable – SW2000XL

Replacement actuator arm with 6 ft. cable for compatible PRO-SW2000XL single swing gate systems. This is an XL-generation component and should be matched to the existing operator before replacement.

GTO PRO2000ARMXLS Replacement Arm – SW2000XLS

Replacement actuator arm for compatible PRO-SW2000XLS swing gate systems. Current replacement information identifies the XLS arm with a 6 ft. cable for primary or single-gate applications.

GTO PRO2002ARMXL Secondary Arm with 32 ft. Cable – SW2002XL

Secondary replacement operator arm with 32 ft. cable for compatible SW2002XL dual swing gate systems. Designed for the second gate leaf rather than as the short-cable primary arm.

GTO PRO3000ARMXL Arm with 6 ft. Cable – SW3000XL

XL-generation replacement actuator arm with 6 ft. cable for compatible PRO-SW3000XL single swing gate systems. Verify XL-series compatibility before ordering.

GTO PRO3000ARMXLS Arm with 6 ft. Cable – SW3000XLS

Replacement actuator arm with 6 ft. cable for the PRO-SW3000XLS. The supported operator platform is designed for compatible single swing gates up to 16 ft. long or 650 lb. per leaf.

GTO PRO4000ARMXL Arm with 6 ft. Cable – SW4000XL

XL-generation replacement actuator arm with 6 ft. cable for compatible PRO-SW4000XL swing gate systems. Match the replacement to the existing XL operator generation.

GTO PRO4000ARMXLS Arm with 6 ft. Cable – SW4000XLS

Replacement actuator arm with 6 ft. cable for compatible PRO-SW4000XLS single swing gate systems. The corresponding operator platform supports compatible gates up to 20 ft. long or 1,000 lb. per leaf.

GTO PRO4200ARMXL Secondary Gate Arm

Secondary or slave actuator arm for compatible dual swing gate systems. This long-cable configuration connects the second gate leaf to the primary control system. Confirm the exact operator generation and cable length before ordering.

Choosing the Correct Replacement Arm

Start with the model number of the existing GTO/Linear PRO swing gate operator. SW2000, SW3000 and SW4000-series systems use different actuator arms, and XL and XLS generations may have different performance or compatibility requirements.

For dual-gate systems, also determine whether the replacement is for the primary or secondary gate leaf. Secondary arms use longer cables so they can connect across the driveway to the main control enclosure.

XL vs. XLS Operator Arms

XL and XLS part numbers represent different generations of GTO/Linear PRO equipment. Some older XL components have been discontinued and newer XLS arms may be available as replacements, but substitution should be verified for the exact system.

On dual-gate systems, mixing actuator generations can create noticeable differences in operating speed. When replacing an older arm, confirm whether both gate leaves require matching actuator models.

Single vs. Dual Gate Applications

Single swing gate systems typically use a short-cable primary actuator arm mounted near the operator control enclosure. Dual swing systems add a secondary arm with a longer cable routed to the opposite gate leaf.

Correct cable length is part of the operator configuration. Do not choose an arm solely by horsepower or physical appearance.

Selection Assistance

Barron Equipment offers GTO/Linear PRO replacement arms and gate operator parts for residential and commercial swing gate systems. Before ordering, confirm the operator model, XL or XLS generation, primary or secondary position and cable length.

Also verify the gate’s size and weight against the limits of the complete operator system. Replacement of the actuator arm does not increase the original gate operator’s rated capacity.

Product Specification

Model

SW2000XL, 6 ft Cable, Single, SW2000XLS, Single, SW2002XL, 32 ft Cable, Dual, SW3000XL, 6 ft Cable, Single, SW3000XLS, 6 ft Cable, Single, SW4000XL, 6 ft Cable, Single, SW4000XLS, 6 ft Cable, Single, SW4200XL, 40 ft Cable, Slave

FAQs

How do I choose the correct GTO replacement arm?

Match the replacement to the exact swing gate operator series, XL or XLS generation, gate position and required cable length.

What is the PRO2000ARMXLS designed for?

The PRO2000ARMXLS is a replacement actuator arm for compatible SW2000XLS swing gate operator systems.

What is the PRO3000ARMXLS designed for?

The PRO3000ARMXLS is a replacement arm with 6 ft. cable for compatible PRO-SW3000XLS single swing gate systems.

What is the PRO4000ARMXLS designed for?

The PRO4000ARMXLS is a 6 ft. cable replacement arm for compatible PRO-SW4000XLS single swing gate systems.

What is a slave or secondary gate arm?

A slave or secondary arm operates the second leaf of a dual swing gate system. It typically uses a longer cable to connect to the primary gate operator controls.

Can I replace an XL arm with an XLS arm?

Only after confirming compatibility for the exact operator. Some XLS arms supersede older XL components, but actuator speed and system configuration can differ.

Does a replacement arm include the mounting brackets?

Not necessarily. Some replacement arms are sold as the actuator and cable only, with mounting brackets or hardware sold separately. Verify package contents for the selected model.

Does replacing the operator arm increase gate capacity?

No. The gate must remain within the rated length and weight limits of the complete operator system.

Request a Quote

Contact Us

Summary

Captcha

Upload PO

5% Off All Stronghold Cabinets