02-103L-LM.png
02-103L-LM.png 02-103L-LM-2.png 02-103L-LM-3.png 02-103L-LM-1.png

LiftMaster 02-103L Three-Button Commercial Door Control Station

Item ID: 02-103L-LM Category

Lead Time: 1 weeks

LiftMaster 02-103L three button control station. Open, close, and stop buttons for LiftMaster commercial garage door operator control.

$34.07

Overview

The LiftMaster 02-103L is an indoor three-button control station for compatible commercial operator systems. Dedicated Open, Close and Stop push buttons provide straightforward manual control from a protected interior location.

The station uses a NEMA 1 surface-mount enclosure and includes a maintenance indicator light for supported LiftMaster applications. Its compact wall-mounted design makes it useful in warehouses, service facilities and other commercial locations where authorized personnel need direct operator control.

LiftMaster 02-103L Three-Button Control Station

The 02-103L provides complete Open, Close and Stop control in one wall-mounted station. Clearly labeled buttons allow users to control the connected operator without relying on a remote transmitter or other access device.

  • Three-button commercial control station
  • Open, Close and Stop push buttons
  • Indoor surface-mount installation
  • NEMA 1 enclosure
  • Maintenance indicator light
  • Designed for compatible LiftMaster commercial operator systems

Open, Close and Stop Control

Separate Open, Close and Stop buttons provide direct control over operator movement. This configuration is commonly used where commercial door operation needs to be controlled from a fixed indoor wall station.

The dedicated Stop button gives the operator user a separate control for stopping door travel rather than relying on a single-button sequence.

Interior Surface-Mount Design

The 02-103L is designed for protected indoor installation. Its NEMA 1 enclosure is intended for interior use rather than wet or exposed outdoor locations.

Surface mounting allows the control station to be installed directly to a suitable wall or mounting surface. Wiring should follow the requirements of the connected LiftMaster operator.

Selection Assistance

Barron Equipment offers control stations and accessories for commercial door operator systems. Before ordering the 02-103L, confirm compatibility with the installed LiftMaster operator and control board.

For exterior or wet-location installations, choose a control station with an environmental enclosure rating appropriate for those conditions rather than using an indoor NEMA 1 station.

FAQs

What does the LiftMaster 02-103L control station do?

It provides dedicated Open, Close and Stop push-button control for compatible commercial operator systems.

Is the 02-103L designed for indoor installation?

Yes. LiftMaster identifies the 02-103L as an indoor surface-mount NEMA 1 control station.

Does the 02-103L have a Stop button?

Yes. The control station has separate Open, Close and Stop buttons.

Does the 02-103L include a maintenance indicator?

The Action Industries-facing product information identifies a built-in maintenance indicator light for supported LiftMaster commercial operator applications.

Can the 02-103L be installed outdoors?

The 02-103L is a NEMA 1 indoor station. Use an appropriately rated exterior control station for outdoor, wet or exposed environments.

Is the 02-103L a wireless control?

No. This is a wired wall-mounted control station that connects to a compatible commercial operator control system.

What should I verify before ordering?

Confirm the installed LiftMaster operator and control-board compatibility, mounting location and required control wiring before ordering.

Request a Quote

Contact Us

Summary

Captcha

Upload PO

5% Off All Stronghold Cabinets