LM-GATE-PART.png
LM-GATE-PART.png LM-GATE-PART-4.png LM-GATE-PART-5.png LM-GATE-PART-6.png LM-GATE-PART-7.png LM-GATE-PART-8.png LM-GATE-PART-1.png LM-GATE-PART-2.png LM-GATE-PART-3.png

LiftMaster Gate Operator Replacement Parts & Accessories

Item ID: LM-GATE-PART Category

Lead Time: 1 weeks

LiftMaster gate operator replacement parts. Logic boards, control boards, encoders, brackets, pins, and heater plates.

From $6.41

Overview

LiftMaster replacement parts and accessories support the repair and maintenance of compatible swing, slide and barrier gate operator systems. Available components include main control boards, position encoders, gate arm hardware, travel-limit components and cold-weather heater equipment.

Select the replacement by matching the exact LiftMaster operator model and original part number. Gate operator parts can be model-specific, so similar-looking electronics, limit components and mechanical hardware should not be assumed interchangeable.

Available Products

LiftMaster K001A6039 LA400 Logic Control Board

Genuine replacement logic control board for compatible LiftMaster LA400 swing gate operators. Verify the existing board and operator parts diagram before replacement.

LiftMaster K1D6597-1CC CSL24V / CSW24V Main Control Board

Replacement main control board for LiftMaster CSL24V commercial slide gate and CSW24V commercial swing gate operators. Includes a yellow LEARN button for compatible accessory programming.

LiftMaster K76-34697-3 12V APS Encoder

12V APS position encoder designed to provide accurate motor and travel-position feedback in compatible LiftMaster operator systems. Match the exact existing encoder before ordering.

LiftMaster MA010 Mega Arm Gate Arm Bracket

Replacement gate arm bracket for LiftMaster Mega Arm and Mega Arm Tower barrier operators. Compatible with right- and left-hand barrier arm configurations.

LiftMaster MA013 Gate Arm Shear Pin

Replacement shear pin for compatible LiftMaster gate arm assemblies. The shear pin serves as a mechanical protection component and should be replaced with the correct OEM-specified part.

LiftMaster Q032 Limit Switch Adjustment Nut

Limit adjustment nut for compatible LiftMaster Elite slide gate operators, including SL3000UL, SL3000ULE and ROBO SLIDE applications. Works with the operator limit shaft to establish open and closed travel boundaries.

LiftMaster Q238 Limit Adjuster Cam – K75-50339

Replacement limit adjuster cam for the LiftMaster Elite CSW200UL commercial swing gate operator. Supports proper adjustment of the operator’s travel limits.

LiftMaster UN201 Barrier Operator Heater Plate

500-watt, 115VAC heater plate for compatible LiftMaster Mega Arm Tower and Mega Arm Sprint Tower barrier operators. Designed to support reliable operation in severe cold-weather conditions.

Choosing the Correct LiftMaster Replacement Part

Start with the operator model and manufacturer part number. LA400, CSL24V, CSW24V, CSW200UL, SL3000UL and Mega Arm platforms use different electronic and mechanical components.

For electronic parts, compare the board or encoder number to the existing component and operator parts diagram. For mechanical parts, verify the exact bracket, shear pin or limit assembly before replacement.

Control Boards and Electronics

K001A6039 is a replacement logic board for the LA400 swing gate operator platform, while K1D6597-1CC serves CSL24V and CSW24V systems. These boards should be selected by exact operator compatibility rather than connector appearance.

K76-34697-3 is an APS encoder used for position feedback in compatible LiftMaster equipment. Encoder replacement should be followed by any required operator setup or travel calibration procedures.

Barrier Gate Hardware and Cold-Weather Components

MA010 provides the barrier arm mounting bracket used with LiftMaster Mega Arm and Mega Arm Tower systems. MA013 is a separate shear-pin component and should not be confused with the arm bracket itself.

For compatible MAT and MAST installations in severe cold conditions, UN201 provides a 500-watt heater plate designed to protect operator components from freezing temperatures.

Limit Adjustment Components

Q032 and Q238 both relate to gate travel limits but serve different operator platforms. Q032 is an adjustment nut used with compatible Elite slide operators, while Q238 is a limit adjuster cam for the CSW200UL swing gate operator.

Always restore and test the operator’s open and closed travel limits after replacing a limit-system component.

Selection Assistance

Barron Equipment offers LiftMaster gate operator replacement components for commercial swing, slide and barrier systems. Before ordering, verify the operator model, manufacturer part number and whether the existing component matches the replacement.

After service, test gate travel, limits, access controls and required entrapment protection before returning the gate system to normal operation.

Product Specification

Type

APS Encoder 12V, Gate Arm Bracket, Gate Arm Shear Pin, Logic Board for LA400, Main Control Board CSL/CSW24V, Limit Adjuster Cam, Limit Switch Adjustment Nut, Heater Plate, MAT/MAST Barrier

FAQs

What operator uses the LiftMaster K001A6039 control board?

K001A6039 is identified as a replacement logic control board for compatible LiftMaster LA400 swing gate operators.

Which operators use K1D6597-1CC?

K1D6597-1CC is designed for compatible LiftMaster CSL24V slide gate and CSW24V swing gate operators.

What is the MA010 used for?

MA010 is a gate arm bracket for LiftMaster Mega Arm and Mega Arm Tower barrier operators and supports both right- and left-hand arm configurations.

What is the Q032 used for?

Q032 is a limit-switch adjustment nut used with compatible SL3000UL, SL3000ULE and ROBO SLIDE gate operators.

What is the Q238 used for?

Q238, also referenced as K75-50339, is a limit adjuster cam for the LiftMaster Elite CSW200UL swing gate operator.

What does the UN201 heater plate do?

UN201 provides 500 watts of 115VAC heating for compatible MAT and MAST barrier operator systems in severe cold-weather conditions.

Can similar LiftMaster control boards be interchanged?

Do not assume so. Match the replacement board to the exact gate operator model and existing manufacturer part number.

Should gate limits be checked after replacing a limit component?

Yes. Open and closed travel positions should be checked and adjusted according to the operator instructions after servicing limit-system components.

Request a Quote

Contact Us

Summary

Captcha

Upload PO

5% Off All Stronghold Cabinets