Overview

PowerPusher’s Rail Mover ™ industrial electric tugs enable a single person to safely move railcars up to 225 tons. The flexible railcar mover operates on or off rails for increased dexterity and efficiency allowing for easy maintenance of freight cars. Remote control operation is available as infrared or radio control for effortless maneuvering. A powered hitch connects and disconnects to rail cars via remote control for smooth contact and performance. Work with design engineers to customize a railcar mover to your company’s unique rolling stock needs.

T-45 Safely moves 45 tons (90,000 lbs.)
T-120 Safely moves 120 tons (240,000 lbs.)
T-225 Safely moves 225 tons (450,000 lbs.)

Features and Benefits

This railcar mover safely moves 45-225 tons (90,000 lbs. to 450,000 lbs.)
Fully battery operated
Hi-rail enabled for on and off-track operation
Zero degree turning
Soft start throttle for smooth take off
Fully remote controlled – radio controlled remote standard, infrared remote control optional
Road/Rail mode
Fast and slow speeds 0 – 3 mph
Powered braking system, parking brakes
Symmetrical operation (forward/reverse)
Low profile for under car operation
Motion alert beeper
Motion strobe light
Maintenance free batteries

Options

Infrared controlled remote
Custom attachments available

FAQs

Do PowerPushers need unique batteries?

No. PowerPushers use deep-cycle marine batteries, which can also be found in a range of boats and other types of waterborne vehicles.

Do PowerPushers include brakes?

Yes. Our PowerPushers can be easily and quickly brought to a halt thanks to their built-in braking systems.

What are the charging requirements for a PowerPusher?

All PowerPusher products can be charged on a 100-240 Volt AC single-phase 50/60 Hz electrical service. The max amp draw will vary by machine, but no more than 7.5 amps can be drawn at maximum.

What is the average run time of a PowerPusher?

A PowerPusher tends to last around 2-6 miles in-between charges. This will fluctuate depending on the size of the load and the environment it’s being used in.

How long does it take to recharge a PowerPusher?

On average, it takes around 6-8 hours to recharge a PowerPusher’s battery, depending on how much power remains.

How fast can a PowerPusher move?

The speed of each machine depends on the configuration of torque and top speed, which can differ per scenario.

Can I modify my PowerPusher’s speed?

Yes. Its top speed and acceleration rate can be adjusted and will apply regardless of which direction you’re moving in.

Will I need a license to operate a PowerPusher?

PowerPushers do not require a license to operate. In fact, very little training is needed to proficiently use one in general.

Can a PowerPusher lift a load?

The MFC-100 includes a high-powered actuator, which makes lifting loads simple. Our two-wheeled PowerPushers can be modified to incorporate lifting functionality, as well.

Nu-Star PowerPusher Rail Mover