Overview
Barron Equipment carries Action Industries slim-line vinyl weather seals for passage door, entry door, and perimeter weatherstripping applications. These USA-made seals install into slim-line #2.5 channel aluminum retainers mounted on door jambs to create a compressive barrier against drafts, moisture, dust, insects, and outdoor contaminants where the door meets the frame.
Two seal profiles are available under this product line. The vinyl bulb seal uses a rounded head that compresses against the door surface when closed, forming an airtight perimeter seal. The vinyl jamb seal uses a flat profile that fills the gap between the door edge and the frame. Both are manufactured from soft, flexible vinyl that holds its shape through repeated door cycles and temperature changes without warping or cracking.
Compatible Applications
These slim-line weather seals are designed for door openings with narrow gaps where standard-size seals would be too large. The #2.5 channel retainer profile is smaller than the standard #4 channel used on commercial overhead doors, making it the correct choice for residential entry doors, interior passage doors, and commercial man doors where a low-profile seal is required.
Both the bulb and jamb profiles are compatible with metal doors, wood doors, and virtually any passage door where a slim-line retainer is already installed or can be mounted. Common installations include front and back entry doors, side doors on garages, interior office doors, warehouse personnel doors, and any opening where controlling air infiltration and pest entry through the door perimeter is a priority.
Color Options
Both seal profiles are available in four colors to match existing door frames and trim. Brown and grey are the most commonly ordered for exterior entry doors and commercial applications. White works well on interior passage doors and lighter-colored frames. Sandstone provides a neutral option that blends with tan and beige trim finishes. Select the color at the time of ordering based on the retainer or frame color already installed at the opening.
Installation
Both seal profiles slide directly into a slim-line #2.5 channel aluminum retainer that is mounted to the door jamb with fasteners. If a compatible retainer is already in place, remove the old seal by pulling it from one end of the channel, clean the channel, and slide the new seal in from one end. Trim to length with a utility knife for a clean fit at each corner.
If no retainer is currently installed, Barron Equipment carries Action Industries slim-line aluminum retainers that mount to the jamb with standard fasteners. The retainer is installed first, then the seal slides into the channel. No adhesives or specialty tools are required. Both seals can also be ordered pre-installed into the retainer for faster field mounting.
Technical Specifications
| Specification | Vinyl Bulb Seal (V2025) | Vinyl Jamb Seal (V2020–V2023) |
|---|---|---|
| Material | Soft vinyl compound | Soft vinyl compound |
| Seal Profile | Bulb (5/16-inch head) | Flat jamb (1-inch width) |
| Strip Height | 1/2 inch | — |
| Retainer Compatibility | Slim-line #2.5 channel | Slim-line #2.5 channel |
| Available Colors | Brown, Grey, Sandstone, White | Brown, Grey, Sandstone, White |
| Sold As | By the foot | By the foot |
| Available Pre-Installed | Yes | Yes |
| Country of Manufacture | Made in the USA | Made in the USA |
| Manufacturer | Action Industries | Action Industries |
Part Numbers
| Part Number | Profile | Color |
|---|---|---|
| V2025-BR-W | Bulb Seal | Brown |
| V2025-GR-W | Bulb Seal | Grey |
| V2025-SS-W | Bulb Seal | Sandstone |
| V2025-WH-W | Bulb Seal | White |
| V2022-BR-W | Jamb Seal | Brown |
| V2021-GR-W | Jamb Seal | Grey |
| V2020-SS-W | Jamb Seal | Sandstone |
| V2023-WH-W | Jamb Seal | White |
Selection Assistance
Choosing between the bulb and jamb profiles depends on the type of seal your door opening requires. The vinyl bulb seal is designed for applications where the seal needs to compress against the face of the closed door to form an airtight perimeter barrier. Its rounded 5/16-inch head conforms to the door surface and is the preferred option for exterior entry doors, where blocking drafts and weather infiltration is the primary goal.
The vinyl jamb seal is a flat-profile strip that fills the gap between the door edge and the frame. It works well on interior passage doors and openings where a flat contact surface is preferred over a compressive bulb. Both seals fit the same #2.5 slim-line retainer, so you can mix profiles on the same door if the top, hinge side, and latch side have different gap conditions.
For color selection, choose the option that best matches the existing retainer or door frame. If you are ordering for multiple doors across a facility, the by-the-foot format allows you to order the exact footage needed for each opening. Measure the full perimeter of each door — both sides and the top — and add a few extra inches per door for trimming at the corners.
If you are unsure which profile or retainer size is correct for your application, contact Barron Equipment with a photo or