Overview
The Southworth DL Series Heavy Duty Hydraulic Lift Table is engineered for industrial applications that demand extreme load capacity and high travel in a structurally reinforced platform. With capacities from 4,000 to 25,000 lbs, raised heights up to 100 inches, and standard platforms as large as 72 x 144 inches (expandable to 108 x 180 inches), the DL Series handles the heaviest loads in Southworth’s lineup. These high capacity lifting tables are built for cargo handling, heavy equipment positioning, vehicle maintenance, and any application where standard lift tables cannot handle the weight or the required platform size.
Twelve standard DL models cover four travel ranges — 36, 48, 60, 72, and 84 inches — across capacities from 4,000 to 25,000 lbs. All models operate on 460V 3‑phase power with a 3.2 HP motor. Built‑in hydraulic overload relief protects both personnel and facility structures from potential damage caused by overloading.
Features and Benefits
Heavy‑plate platforms with structural reinforcements minimize deflection even under extreme loads. A wide base frame provides increased rigidity and stability, which is critical when lifting multi‑ton loads to heights of six feet or more. Top plate thickness ranges from 3/8 inch on mid‑capacity models to 1/2 inch on the highest‑capacity configurations.
Southworth’s proven hydraulic system delivers smooth, controlled raising and lowering with fully adjustable down speed. Lubricated‑for‑life pins, rollers, and bushings reduce long‑term maintenance. Full‑width, straight‑through axles add stability throughout the travel range. Heavy duty wire‑braided hoses provide maximum burst strength. Built‑in safety maintenance props are standard on every model.
Applications
The DL Series serves applications where standard lift tables cannot handle the load or platform size requirements. Common uses include cargo handling where containers, crates, and oversized loads must be raised to truck bed height, heavy equipment maintenance where vehicles or machinery are elevated for underside access, die handling and tooling transfer where multi‑ton dies must be positioned precisely, aerospace and defense manufacturing where large assemblies require heavy lift capacity, and any industrial process where loads between 4,000 and 25,000 lbs must be raised to heights up to 100 inches.
Selection Assistance
Choosing the right DL model depends on your required capacity, travel range, and platform size. The DL20‑36 provides 20,000 lbs capacity in the most compact configuration. The DL25‑48 handles 25,000 lbs with 48 inches of travel. The DL10‑84 and DL6‑84 provide the highest raised heights at 100 inches for applications requiring extreme vertical reach. For loads under 6,000 lbs, Southworth’s standard Backsaver Hydraulic and LS Series provide more economical options. Barron Equipment can help you select the right DL configuration. Contact our team to discuss your application.