Overview
Barron Equipment carries Action Industries standard vinyl jamb seals for side and top weatherstripping on residential and commercial garage doors. These flexible vinyl strips install into standard #4 channel retainers mounted on door jambs to close the gaps where the door meets the frame, blocking drafts, moisture, dust, debris, and pests from entering around the perimeter of the opening.
Made from a durable vinyl compound that retains its shape under repeated compression cycles and temperature changes, this seal provides consistent contact without cracking or warping over time. It is compatible with both standard aluminum retainers and standard rolling steel clip-on retainers from Action Industries, making it a versatile replacement for worn side and top weatherstripping on a wide range of door types and frame configurations.
Width and Color Options
This standard vinyl seal is available in three widths to match the gap size between the closed door and the frame. The 1-inch width is suited for narrow gaps and tighter door-to-frame clearances. The 1-3/8 inch width covers the most common residential and commercial applications. The 2-inch width provides the widest coverage and is the right choice for larger gaps or frames where a broader sealing surface is needed.
Each width is offered in white, grey, and black to coordinate with the existing door frame, retainer, or building exterior. Select the color that best matches the surrounding material for a clean, finished appearance.
Retainer Compatibility
This seal is designed for standard #4 channel retainers, which are the most common retainer profile used on commercial overhead and sectional garage doors. It is also compatible with standard rolling steel clip-on retainers from Action Industries. Before ordering, confirm that your door frame uses a #4 channel or compatible clip-on retainer. If you are unsure, contact Barron Equipment with a photo or measurement and we can verify the correct seal and retainer match.
This product is not compatible with slim-line #2.5 channel retainers or large #7 channel retainers. For slim-line applications, see the Slim-Line Vinyl Seal product page.
Installation
These vinyl strips slide directly into the retainer channel mounted on the door jamb. To replace an existing seal, pull the old material out from one end of the retainer, clean the channel, and feed the new vinyl strip in from the same end. Trim to length at each corner with a utility knife for a clean fit. No adhesives, fasteners, or specialty tools are required beyond the retainer itself.
For new installations where no retainer is currently mounted, Barron Equipment carries compatible standard aluminum retainers that mount to the jamb with standard fasteners. The seal can also be ordered pre-installed into the retainer for faster on-site mounting.
Technical Specifications
| Specification | Details |
|---|---|
| Material | Flexible vinyl compound |
| Seal Placement | Sides and top of garage door frame |
| Retainer Compatibility | Standard #4 channel and rolling steel clip-on retainers |
| Available Widths | 1 inch, 1-3/8 inch, 2 inch |
| Available Colors | White, Grey, Black |
| Sold As | By the foot |
| Available Pre-Installed | Yes |
| Country of Manufacture | Made in the USA |
| Manufacturer | Action Industries |
Part Numbers
| Part Number | Width | Color |
|---|---|---|
| V0023-WH-W | 1 inch | White |
| V0021-GR-W | 1 inch | Grey |
| V0024-BL-W | 1 inch | Black |
| V0033-WH-W | 1-3/8 inch | White |
| V0031-GR-W | 1-3/8 inch | Grey |
| V0034-BL-W | 1-3/8 inch | Black |
| V0043-WH-W | 2 inch | White |
| V0041-GR-W | 2 inch | Grey |
| V0044-BL-W | 2 inch | Black |
Selection Assistance
To choose the right width, measure the gap between the closed door and the frame where the seal will make contact. If the old seal is still in place, measure its width laid flat as a reference. The 1-inch width is the best fit for narrow clearances. The 1-3/8 inch width is the most commonly ordered size and covers the majority of standard door frames. The 2-inch width is recommended when the gap is wider than what a 1-3/8 inch seal can cover effectively.
For color selection, match the seal to the existing retainer or door frame trim. White and grey are the most common for residential installations, while black is typically used on commercial and industrial door frames.
This seal is sold by the foot. To determine how much material to order, measure both sides and the top of the door opening where weatherstripping is needed. Enter the total footage in the quantity field. Each order ships as one continuous piece. Add a few extra inches per door to allow for trimming at corners.
If you are unsure whether your retainer is a standard #4 channel or need help choosing the correct width, contact Barron Equipment with a photo or measurement and we will confirm the right product for your door.