Overview
Most standard 2 wheel hand trucks top out at 300 to 400 lbs and use pneumatic tires that go flat at the worst possible time. This heavy duty two wheel hand truck doubles the typical capacity at 600 lbs and eliminates flat tires entirely with 10″ x 4.1″ airless rubber wheels that maintain full performance on rough surfaces, gravel, cracked concrete, and construction debris.
The reinforced tubular steel frame with center braces provides the structural rigidity needed for heavy, bulky loads — appliances, stacked cartons, crates, equipment, and building materials. The extra-wide 6″ x 22″ nose plate (9-gauge steel) gives maximum leverage when tilting and lifting heavy items. An angled handle improves grip and load control from the top. Recessed wheels allow the loaded truck to fit through standard doorways without scraping frames. Weighs 38 lbs. Ships UPS. Every unit is manufactured by Raymond Products in Minneapolis, Minnesota with a lifetime warranty.
Features and Benefits
The airless rubber tires are the standout feature. Pneumatic tires on standard hand trucks go flat from nails, screws, glass, and rough terrain — especially on construction sites and in warehouses with metal debris on the floor. These 10″ x 4.1″ solid rubber wheels never need inflation, never go flat, and never need replacement tubes. They roll smoothly over uneven concrete, asphalt, gravel, and threshold transitions with the same shock absorption as pneumatic tires — minus the maintenance.
The 6″ x 22″ nose plate is significantly wider than the standard 4″ to 5″ nose found on most 2 wheel hand trucks. The extra width distributes load weight more evenly, reduces the chance of items sliding off the plate, and provides better leverage when tilting heavy loads back onto the wheels. The 9-gauge steel construction means the nose plate won’t bend or deform under maximum load.
The angled handle design sets this apart from straight-handle trucks. The angle positions your hands higher relative to the load, improving control when tilting back and reducing wrist strain during long moves. The reinforced tubular steel frame with welded center braces prevents frame flex under heavy loads — a common failure point on lighter-gauge hand trucks. Powder-coated finish resists chips, scratches, and rust.
Applications
Warehouses and distribution centers use this two wheel hand truck for moving appliances, heavy cartons, crated equipment, and palletized materials from dock to storage. The 600 lb capacity handles loads that would exceed a standard hand truck. The airless tires roll over dock plates, expansion joints, and warehouse floor imperfections without catching.
Construction and job sites are where the airless tires really pay off. Nails, screws, wire, and rough terrain destroy pneumatic tires within weeks. Solid rubber wheels keep rolling regardless. Contractors use this truck to move building materials, tool boxes, generators, and heavy equipment from the truck to the work area.
Schools and offices use it for receiving — moving heavy deliveries, copy paper pallets, and equipment from the loading dock to the supply room. Facility maintenance teams use it for HVAC components, plumbing supplies, and heavy janitorial equipment. The recessed wheel design fits through standard 36″ doorways without scraping door frames.
Selection Assistance
Choose this 2 wheel hand truck when you regularly move loads between 300 and 600 lbs and need airless tires that won’t go flat on rough surfaces. The wide nose plate and reinforced frame handle the heavy, bulky items that standard hand trucks can’t.
For lighter loads (under 300 lbs) on smooth indoor floors, a standard hand truck with smaller rubber wheels provides adequate capacity at a lower weight. For drum-specific transport, the drum hand truck series provides chime hooks and drum-specific securing mechanisms.
Need help choosing? Fill out the form below or contact us directly.