USA-ACTUATOR.png
USA-ACTUATOR.png USA-ACTUATOR-6.png USA-ACTUATOR-7.png USA-ACTUATOR-1.png USA-ACTUATOR-2.png USA-ACTUATOR-3.png USA-ACTUATOR-4.png USA-ACTUATOR-5.png USA-ACTUATOR-11.png USA-ACTUATOR-12.png USA-ACTUATOR-13.png USA-ACTUATOR-8.png USA-ACTUATOR-9.png USA-ACTUATOR-10.png

USAutomatic Gate Operator Actuators & Replacement Parts

Item ID: USA-ACTUATOR Category

Lead Time: 1 weeks

USAutomatic actuators, motors, drive gears, gaskets, and related components for Patriot and Ranger gate operator systems.

From $6.36

Overview

USAutomatic actuator parts support repair and maintenance of compatible Patriot, Ranger and Patriot RSL automatic gate operators. Available options include complete swing gate actuators, actuator motors, drive screw assemblies, limit components, protective tubes, seals and a slide gate gear motor.

Select parts by matching the exact operator and manufacturer part number. Patriot, Ranger 500, Ranger HD and Patriot RSL systems use different actuator and drive components that should not be assumed interchangeable.

Available Products

USAutomatic 501105 Patriot Blue Limit Drive Gear

Replacement blue limit drive gear for Patriot linear actuators. Drives the actuator’s limit mechanism to support accurate gate travel and stopping positions.

USAutomatic 510001 Patriot Complete Actuator with 8 ft. Cable

Complete replacement linear actuator for Patriot swing gate operators. Includes an integrated wiring harness with 8 ft. of cable for replacement of the full actuator assembly.

USAutomatic 510006 Ranger HD Complete Actuator

Heavy-duty linear actuator for Ranger HD single and dual swing gate systems. Features a 24 in. stroke and can be installed in push- or pull-to-open configurations.

USAutomatic 510010 Patriot Acme Screw Assembly

Replacement Acme screw assembly for Patriot linear actuators. Restores the primary mechanical drive component responsible for extending and retracting the actuator.

USAutomatic 510020 Patriot Stainless Steel Cover Tube Assembly

Replacement stainless steel outer cover tube for Patriot linear actuators. Protects the Acme screw and internal actuator components from environmental exposure.

USAutomatic 510100 Patriot Gearbox Inner Gasket

Replacement inner gearbox gasket for Patriot actuator assemblies. Provides sealing between the applicable gearbox components.

USAutomatic 510101 Patriot Rear Cover Gasket

Replacement rear actuator cover gasket for Patriot linear actuators. Helps seal the rear housing against moisture, dust and debris.

USAutomatic 510105 Patriot Actuator Limit Shaft

Replacement limit shaft for Patriot actuators. The manufacturer’s replacement-parts catalog specifies that the associated gear is not included with this part.

USAutomatic 510107 Actuator Rubber Plug

Replacement rubber sealing plug for compatible USAutomatic actuator housings. Helps protect internal components from dust, dirt and moisture.

USAutomatic 510109 Patriot Actuator Motor

Replacement electric drive motor for Patriot linear actuator assemblies. Allows the actuator motor to be serviced without automatically replacing the entire actuator.

USAutomatic 510121 Ranger 500 Potentiometer & Gear Assembly

Replacement potentiometer and gear assembly for Ranger 500 swing gate operators. Provides position feedback used by the operator control system to monitor gate travel.

USAutomatic 510125 Ranger 500 Cover Tube Seal

Replacement seal for the cover tube on Ranger 500 actuator assemblies. Helps protect the actuator from moisture and outdoor contaminants.

USAutomatic 510201 Patriot RSL Slide Gate Gear Motor

Replacement gear motor for Patriot RSL slide gate operators. Includes a mounting bracket for installation into the compatible operator drive system.

Choosing the Correct Actuator Part

Start by identifying whether the gate uses a Patriot swing operator, Ranger 500, Ranger HD or Patriot RSL slide operator. These systems use different actuator, motor and position-control components.

For repairs to an existing actuator, identify the exact failed component before replacing the entire assembly. Motors, seals, limit components, cover tubes and drive screws are individually serviceable on supported actuator platforms.

Complete Actuator vs. Internal Repair Parts

The 510001 Patriot and 510006 Ranger HD products are complete actuator assemblies. These are appropriate when the actuator requires full replacement or when repairing multiple internal components is not practical.

Parts such as 510010, 510020, 510100, 510101, 510105, 510107 and 510109 are individual Patriot actuator service components. Use the actuator parts diagram and original part number to identify the correct repair component.

Patriot Actuator Components

The Patriot linear actuator uses several serviceable components. The Acme screw converts motor rotation into linear actuator movement, while the limit gear and shaft support travel-position control. Cover tubes, gaskets and plugs protect the internal components from outdoor exposure.

When opening an actuator for service, inspect adjacent sealing components for wear or damage. Replacing a motor or drive component while reinstalling a damaged gasket can allow moisture and debris into the repaired actuator.

Ranger Actuator Components

Ranger HD uses the 510006 heavy-duty linear actuator, while Ranger 500 uses its own actuator components and position-feedback system. The 510121 potentiometer and gear assembly and 510125 cover-tube seal are identified for Ranger 500.

Ranger HD and Ranger 500 parts should not be treated as interchangeable simply because both products use the Ranger name.

Selection Assistance

Barron Equipment offers USAutomatic actuator assemblies and replacement components for swing and slide gate systems. Before ordering, confirm the gate operator family, original part number and whether the repair requires a complete actuator or an internal component.

After actuator repair or replacement, verify gate movement, travel limits, obstruction response and required entrapment protection before returning the automatic gate to service.

Product Specification

Type

Acme Screw Assembly, Blue Limit Drive Gear, Cover Tube Assembly, Gear Motor, Patriot RSL Slide, Limit Shaft, Motor, Patriot Actuator Gasket, Patriot Actuator w/ 8 ft Cable, Potentiometer Gear Assy, Ranger, Ranger HD Actuator Arm, Rubber Plug, Seal for Cover Tube, Ranger

FAQs

What is the USAutomatic 510001?

The 510001 is a complete replacement actuator for Patriot swing gate operators and includes an 8 ft. wiring harness.

What is the USAutomatic 510006?

The 510006 is the complete heavy-duty actuator used with Ranger HD swing gate systems.

What is the difference between 510100 and 510101?

510100 is the Patriot gearbox inner gasket. 510101 is the Patriot actuator rear cover gasket. They seal different areas of the actuator.

Does 510105 include the limit gear?

No. USAutomatic's current replacement-parts catalog identifies 510105 as the Patriot actuator limit shaft and specifically notes that the gear is not included.

What does 510121 do?

The 510121 potentiometer and gear assembly provides position feedback for Ranger 500 swing gate operators.

Can I replace only the motor in a Patriot actuator?

Yes. USAutomatic 510109 is available as a replacement motor for compatible Patriot linear actuator assemblies.

What is 510201 used for?

510201 is a replacement gear motor for compatible Patriot RSL slide gate openers and includes the mounting bracket.

How do I choose between a complete actuator and individual repair parts?

Identify the failed component and overall condition of the actuator. A motor, seal, limit part or drive screw may be replaced individually when the rest of the actuator remains serviceable. Use the complete actuator when full assembly replacement is required.

Request a Quote

Contact Us

Summary

Captcha

Upload PO

5% Off All Stronghold Cabinets