Product Specification
| Color | |
|---|---|
| Size | 100 ft Roll, 100 ft. Roll, Per Foot, Per ft. |
Vinyl Insert Door Seal – 1-5/16 inch Stop Mould
Lead Time: 3 days
1-5/16″ vinyl insert seal for stop mould applications on garage door jambs. Inserts into the moulding channel to create a tight seal at the door frame. Available in brown, grey, and white. Sold per foot or in 100 ft bulk rolls.
From $1.25
FAQs
How does this vinyl insert seal attach to the door frame?
The seal presses directly into a 1/8-inch wide saw kerf cut into the face of the stop molding. It does not require nails, glue, silicone, or a separate retainer channel. The attachment profile holds the seal in place by friction within the groove.
What size kerf does this seal require?
The seal requires a 1/8-inch (0.125-inch) wide saw kerf. Confirm that your molding has this groove — or that you can cut one — before ordering. The seal will not fit wider or narrower kerf cuts.
Can I use this seal on a door that currently has no kerf?
Yes, as long as a 1/8-inch saw kerf can be cut into the existing wood, plastic, or composite stop molding. If the frame cannot accept a kerf cut, a retainer-based weatherstrip system may be a better option. Contact Barron Equipment for alternatives.
How do I order the right amount?
Measure both sides and the top of each door opening where the seal will be installed. Enter the total footage in the quantity field. Orders ship as one continuous piece. For multiple doors, the 100-foot reel provides material for approximately five to six standard passage doors.
Can the seal be trimmed after installation?
Yes. Install and position the seal fully before trimming. Cut the excess with a utility knife. Avoid stretching the vinyl during installation, as this can cause the material to pull away from the kerf over time.
What is included with my order?
Your order includes the vinyl insert seal only in the selected color and footage. Stop molding, fasteners, and other door hardware are not included.