Overview
Barron Equipment carries Action Industries vinyl T-end bottom weather seals for residential and commercial garage door applications. These USA-made replacement seals slide into compatible 1/4-inch T-style bottom retainers to restore a reliable barrier along the lower edge of the door, helping block drafts, moisture, dust, debris, and pests from entering the space below.
Whether you are replacing a single worn-out seal on a service call or stocking material for multiple doors, this vinyl bottom seal is available by the foot for cut-to-length convenience or in 200-foot reels for high-volume jobs and truck stock replenishment.
Sizes, Colors, and Ordering Options
This garage door bottom seal is offered in three widths to match existing retainer setups and floor gap requirements. A 3-inch seal works well for flat floors with minimal clearance. A 4-inch option covers the most common residential and light commercial applications. The 6-inch width is designed for wider gaps and uneven floor surfaces where additional coverage is needed to maintain a consistent seal.
Color options include black, grey, and yellow depending on the width selected. The 4-inch width is the only size available in all three colors, including yellow for safety-marking applications. When ordering by the foot, enter the total footage needed in the quantity field. Each by-the-foot order ships as one continuous piece for cleaner installation with fewer seams.
Retainer Compatibility and Fit
This vinyl weather seal uses a 1/4-inch T-end attachment profile, which is the most common bottom seal connection found on steel sectional garage doors. Before ordering, confirm that your existing bottom retainer has two slots that accept T-shaped edges. If the retainer is bent, corroded, or otherwise damaged, installing a new seal alone may not restore proper sealing performance. Barron Equipment carries compatible aluminum bottom seal retainers if a full replacement is needed.
Garage door bottom seal designs can vary between manufacturers and model years. If you are unsure whether your retainer accepts a T-end profile, contact Barron Equipment with a photo or measurement of the existing channel and we can help verify the correct match before you order.
Installation Best Practices
Open the garage door to a comfortable working height and disconnect the opener so the door stays in place during installation. Remove the old seal by pulling it out from one end of the retainer channel. Clean any dirt, debris, or corrosion from inside the channel before sliding in the new weather seal.
If the seal is difficult to feed through the retainer, a small amount of dish soap applied inside the channel provides enough lubrication to slide the material through smoothly. On wider doors, a second person helping guide the seal from the opposite end will speed up the process and reduce the chance of kinking. Once installed, center the seal evenly across the door width, then trim any excess material from each end for a clean fit. Close the door and verify that the seal makes consistent contact with the floor across the full opening.
Technical Specifications
| Specification | Details |
|---|---|
| Material | Vinyl |
| Attachment Profile | 1/4-inch T-End |
| Available Widths | 3 inch, 4 inch, 6 inch |
| Available Colors | Black, Grey, Yellow (Yellow in 4 inch only) |
| Sold As | By the foot or 200-foot reels |
| Door Compatibility | Residential and commercial garage doors with T-style retainers |
| Country of Manufacture | Made in the USA |
| Manufacturer | Action Industries |
Part Numbers
| Part Number | Width | Color | Package |
|---|---|---|---|
| V2563-BL-W | 3 inch | Black | By the Foot |
| V2563-BL-W-200 | 3 inch | Black | 200 ft Reel |
| V2563-GR-W | 3 inch | Grey | By the Foot |
| V2563-GR-W-200 | 3 inch | Grey | 200 ft Reel |
| V2564-BL-W | 4 inch | Black | By the Foot |
| V2564-BL-W-200 | 4 inch | Black | 200 ft Reel |
| V2564-GR-W | 4 inch | Grey | By the Foot |
| V2564-GR-W-200 | 4 inch | Grey | 200 ft Reel |
| V2564-YL-W | 4 inch | Yellow | By the Foot |
| V2564-YL-W-200 | 4 inch | Yellow | 200 ft Reel |
| V2566-BL-W | 6 inch | Black | By the Foot |
| V2566-BL-W-200 | 6 inch | Black | 200 ft Reel |
| V2566-GR-W | 6 inch | Grey | By the Foot |
| V2566-GR-W-200 | 6 inch | Grey | 200 ft Reel |
Selection Assistance
Choosing the right vinyl T-end bottom seal comes down to three factors: width, color, and order quantity. Start by measuring the old seal laid flat across its full width. If the old seal is missing or too deteriorated to measure, check the retainer channel width and the size of the gap between the bottom of the closed door and the floor.
For most standard residential garage doors with flat, even concrete floors, a 3-inch or 4-inch seal provides adequate coverage. The 4-inch option is the most commonly ordered size and is available in all three color options, making it the go-to for general-purpose replacement work. If the garage floor is uneven, cracked, or sloped — or if the existing gap is larger than what a 4-inch seal can cover — step up to the 6-inch width for a more forgiving seal that maintains floor contact across inconsistencies.
For single-door service calls, ordering by the foot is the most practical option. Measure the door width, add a few extra inches for trimming, and enter the total footage as your quantity. For dealers and installers servicing multiple doors or maintaining truck stock, the 200-foot reel format reduces per-foot cost and ensures material is on hand when you need it.
If you are unsure which width, color, or retainer type is the right match for your application, Barron Equipment’s product specialists can help. Contact us with your door measurements, a photo of the existing retainer, or the door manufacturer and model number, and we will point you to the correct seal.