10-030.png
10-030.png

AAS 10-030 Locking Blank Faceplate Access Control Enclosure

Lead Time: 3 days

AAS blank faceplate enclosure with key, 7-3/8″H x 7-3/8″W x 5″D. Lockable enclosure for mounting access control components at gate entries.

$266.23

Overview

The AAS 10-030 is a locking post-mount enclosure with a blank faceplate for custom gate and access control installations. The station provides a secure housing that can be modified to accommodate compatible aftermarket keypads, switches, controls and other access components.

The enclosure measures 7-3/8 in. H x 7-3/8 in. W x 5 in. D and uses durable 16-gauge construction for commercial access control environments. A CH 751 key lock secures the enclosure while allowing authorized access to the components installed inside.

Because the faceplate is blank, installers can configure the station around the equipment required for the application rather than being limited to a predetermined keypad or control layout.

Available Products

AAS 10-030 Blank Faceplate Enclosure with Key

The AAS 10-030 provides a customizable post-mounted housing for compatible access control components. Its blank faceplate can be modified according to the equipment being installed, making the enclosure useful for custom gate entry and access control projects.

  • Blank faceplate for custom access control installations
  • Post-mount enclosure
  • 7-3/8 in. H x 7-3/8 in. W x 5 in. D
  • 16-gauge stainless steel faceplate
  • Powder-coated metal enclosure
  • CH 751 key lock
  • Locking access for internal components
  • Designed to house compatible aftermarket equipment
  • Suitable for commercial gate and access control applications

Building a Custom Access Control Station

A blank access control enclosure provides flexibility when a standard preconfigured entry station does not match the equipment required for an installation. The faceplate can be modified to support compatible access control components while the enclosure provides space for related wiring and hardware.

This makes the 10-030 useful for customized gate entry systems, equipment replacements and installations that combine components not offered together in a factory-configured station.

The specific components, cutouts and mounting arrangement should be planned before modifying the faceplate to ensure the finished station provides adequate clearance and access for installation and service.

Post-Mount Access Control Enclosure

The 10-030 is intended for post-mounted access control installations. Pedestal mounting holes and rear wiring access support integration at gate entrances and other controlled access points.

Post mounting can position the access control equipment where drivers, visitors or authorized users can conveniently reach the installed keypad, switch or other device. The station location should be selected according to the entrance configuration and the equipment being installed.

Locking Enclosure for Access Control Components

A CH 751 key lock allows the enclosure to remain secured during normal operation while providing authorized access to installed components when maintenance or service is required.

The metal housing also provides physical protection around internal equipment and wiring. The enclosure should still be installed according to the environmental and electrical requirements of the components placed inside.

Choosing Components for a Blank Faceplate Enclosure

Before modifying the blank faceplate, verify the dimensions and mounting requirements of the keypad, reader, switch or other equipment being installed. Consider component depth, wiring connections, required clearances and future service access.

The enclosure measures 7-3/8 in. high by 7-3/8 in. wide by 5 in. deep. Equipment should fit within the available space after accounting for the faceplate, mounting hardware, wiring and other components inside the station.

Selection Assistance

Barron Equipment offers keypads, readers, intercoms and access control components for commercial gate and door systems. A blank enclosure can be useful when a standard entry station does not provide the component configuration required for the project.

The AAS 10-030 is designed for custom post-mounted access control installations requiring a blank faceplate and locking enclosure. Before ordering, confirm the component dimensions, mounting requirements, wiring layout and enclosure space required for the finished station.

FAQs

What is the AAS 10-030 used for?

The AAS 10-030 is a blank post-mount enclosure for custom gate and access control stations. The faceplate can be modified to accommodate compatible aftermarket access control components.

What are the dimensions of the AAS 10-030?

The enclosure measures approximately 7-3/8 in. high by 7-3/8 in. wide by 5 in. deep.

Does the AAS 10-030 include a keypad?

No. The 10-030 has a blank faceplate and enclosure. Keypads, readers and other access control components are selected and installed separately.

Does the enclosure include a lock?

Yes. The enclosure uses a CH 751 key lock to secure access to the equipment installed inside.

What is the faceplate made from?

The blank faceplate is constructed from 16-gauge stainless steel. The enclosure uses durable powder-coated metal construction.

Is the AAS 10-030 designed for post mounting?

Yes. The enclosure is designed as a post-mounted custom access control station and includes provisions for pedestal mounting and wiring access.

Can I modify the blank faceplate?

Yes. The blank faceplate is intended to support custom access control installations. Verify component dimensions, clearances and mounting requirements before making any modifications.

Can the enclosure house different access control components?

Yes. The enclosure can be configured for compatible aftermarket components that fit within the available space and can be properly mounted to the faceplate. Equipment compatibility and environmental requirements should be verified before installation.

Request a Quote

Contact Us

Summary

Captcha

Upload PO

5% Off All Stronghold Cabinets