Overview
The AAS 18-012 is a pad-mounted gooseneck pedestal designed to position access control equipment at truck height. The elevated mounting position makes keypads, card readers, intercoms and other compatible entry devices easier to reach from commercial trucks and other large vehicles.
The pedestal uses heavy 14-gauge steel construction with a durable powder-coated finish for commercial and industrial gate environments. Its gooseneck design extends the mounted access control device toward the driver while the base provides a stable connection to a concrete mounting pad.
This product is the pedestal only. Keypads, card readers, intercoms and other access control devices are selected separately according to the requirements of the gate or entry system.
Available Products
AAS 18-012 Truck-Height Pad-Mount Gooseneck Pedestal
The 18-012 provides an elevated mounting platform for compatible access control equipment at commercial truck entrances. The legacy configuration is identified as a 72 in. truck-height pedestal with approximately 11.5 in. of gooseneck reach.
- Truck-height access control pedestal
- Pad-mount installation
- Gooseneck mounting design
- Approximately 72 in. overall height on legacy 18-012 configuration
- Approximately 11.5 in. gooseneck reach
- Heavy 14-gauge steel construction
- Durable powder-coated finish
- Designed for keypads, card readers and intercom stations
- Suitable for commercial and industrial gate entrances
- Access control equipment sold separately
Why Use a Truck-Height Access Control Pedestal?
Standard car-height pedestals can position access controls too low for convenient use by drivers of semi-trucks, delivery vehicles and other large commercial vehicles. A truck-height pedestal raises the keypad, reader or intercom so the device can be reached more comfortably from an elevated cab.
Proper mounting height can improve usability at truck gates, loading facilities, warehouses, distribution centers and industrial entrances. The final pedestal location should account for vehicle position, lane geometry and the access control device being installed.
Gooseneck Design for Gate Entry Equipment
The gooseneck shape extends the access control mounting surface toward the vehicle lane. This helps position the installed device within reach while allowing the pedestal base to remain securely mounted outside the primary vehicle path.
The legacy 18-012 uses approximately 11.5 in. of gooseneck reach. When planning the installation, check the final device position against expected vehicle width, mirror clearance and approach angle.
Pad-Mount Installation
The pedestal is designed to anchor to a suitable concrete pad. Pad mounting provides a stable base for access control equipment at commercial and industrial entrances while allowing wiring to be routed to the installed device.
The foundation, anchor arrangement and conduit layout should be planned before installation. The access control device and pedestal should be positioned so drivers can reach the equipment without placing the post, device or wiring in the path of moving vehicles.
Choosing Equipment for a Truck-Height Pedestal
A truck-height pedestal can support a range of compatible access control equipment, including digital keypads, proximity card readers and exterior intercom stations. The selected device should match the mounting surface and provide adequate clearance for wiring and service access.
For mixed traffic entrances, consider whether both truck-height and car-height access points are required. A dedicated truck pedestal may be paired with a separate lower pedestal when passenger vehicles and commercial trucks use the same controlled entrance.
Selection Assistance
Barron Equipment offers AAS and Security Brands keypads, proximity readers, intercoms and mounting components for commercial gate access control systems. Pedestal selection should be based on the vehicles using the entrance, required mounting height, device type and installation method.
The AAS 18-012 is designed for truck-height applications requiring a pad-mounted gooseneck pedestal. Before installation, verify the mounting dimensions of the keypad, reader or intercom and confirm that the pedestal position provides safe clearance from vehicles and moving gate components.

