FIND US
Davenport, IA
4710 N Brady St
Davenport, IA 52806
Des Moines, IA
2276 NE 46th Ave
Des Moines, IA 50317
Air Curtain Doors
Barron Equipment carries Powered Aire BCE Series and BCT Series air curtain doors in widths from 36 inches to 144 inches, available in both heated electric and non-heated configurations. All BCE and BCT units are constructed with 18-gauge 304 stainless steel and are USDA, FDA, and AIB approved as a method of flying insect control. Heated models use electric heating elements to provide supplemental warmth at exterior openings, while non-heated models focus on environmental separation and pest exclusion. Lead time for all models is approximately 4 weeks from the order date.
Air curtain doors are part of Barron Equipment’s Environmental & Hygiene Control product line, which also includes PVC strip doors, bug blocker screens, and other barrier solutions for commercial and industrial facilities. These products serve operations that require pest exclusion, temperature separation, and sanitation compliance at open doorways — from food processing plants and cold storage facilities to loading docks and distribution centers. Barron Equipment has been serving commercial and industrial facilities across Iowa and the Midwest since 1979, with installation and service support from locations in Davenport and Des Moines.
-
36 Inch Air Curtain – Stainless Steel
Item ID: BCE-1-36$1,535.81 Select options This product has multiple variants. The options may be chosen on the product page -
108 Inch Air Curtain – Heated Electric – Stainless Steel
Item ID: BCT-3-108E$5,291.12 Select options This product has multiple variants. The options may be chosen on the product page -
108 Inch Air Curtain – Stainless Steel
Item ID: BCT-3-108$4,249.73 Select options This product has multiple variants. The options may be chosen on the product page -
120 Inch Air Curtain – Heated Electric – Stainless Steel
Item ID: BCT-3-120E$5,477.22 Select options This product has multiple variants. The options may be chosen on the product page -
120 Inch Air Curtain – Stainless Steel
Item ID: BCT-3-120$4,632.08 Select options This product has multiple variants. The options may be chosen on the product page -
132 Inch Air Curtain – Heated Electric – Stainless Steel
Item ID: BCT-3-132E$6,160.77 Select options This product has multiple variants. The options may be chosen on the product page -
132 Inch Air Curtain – Stainless Steel
Item ID: BCT-3-132$5,078.68 Select options This product has multiple variants. The options may be chosen on the product page -
144 Inch Air Curtain – Heated Electric – Stainless Steel
Item ID: BCT-4-144E$7,410.56 Select options This product has multiple variants. The options may be chosen on the product page -
144 Inch Air Curtain – Stainless Steel
Item ID: BCT-4-144$5,692.37 Select options This product has multiple variants. The options may be chosen on the product page -
36 Inch Air Curtain – Heated Electric – Stainless Steel
Item ID: BCE-1-36E$2,033.01 Select options This product has multiple variants. The options may be chosen on the product page -
42 Inch Air Curtain – Heated Electric – Stainless Steel
Item ID: BCE-1-42E$2,181.19 Select options This product has multiple variants. The options may be chosen on the product page -
42 Inch Air Curtain – Stainless Steel
Item ID: BCE-1-42$1,645.06 Select options This product has multiple variants. The options may be chosen on the product page
BCE Series vs. BCT Series Air Curtains
Powered Aire manufactures two stainless steel air curtain series. Choosing the correct one depends on door width and mounting height — an undersized unit leaves gaps in the air barrier that allow insects and unconditioned air into the facility.
| Specification | BCE Series | BCT Series |
|---|---|---|
| Max Mounting Height | 8 ft. | 10 ft. |
| Motor HP | 1/2 HP | 3/4 HP per motor |
| Available Widths at Barron | 36″ – 42″ | 108″ – 144″ |
| Best Applications | Personnel doors, service entries, kitchen pass-throughs | Loading docks, warehouse bays, industrial overhead doors |
| Heated Options | Yes — electric | Yes — electric |
| USDA / FDA / AIB Approved | Yes | Yes |
| Construction | 18-gauge 304 stainless steel | 18-gauge 304 stainless steel |
| Non-Heated Voltage/Phase | 120/1, 208/1, 240/1 | 120/1, 208/3, 240/3, 480/3 |
| Heated Voltage/Phase | 208/3, 240/3, 480/3 | 208/3, 240/3, 480/3 |
The BCE Series uses 1/2 HP single-phase motors at 1,400 RPM and mounts on openings up to 8 feet high. It is sized for personnel doors, production room entries, and kitchen pass-throughs. The BCE-1-36 (36″ non-heated) starts at $1,535.81, and the BCE-1-36E (36″ heated electric) starts at $2,033.01. A 42-inch heated electric model (BCE-1-42E) is also available at $2,181.19.
The BCT Series uses 3/4 HP multi-motor systems at 1,630 RPM and covers openings up to 10 feet high. It is built for loading dock doors, warehouse overhead doors, and large cold storage entries where forklifts and heavy equipment pass through continuously. Barron Equipment carries BCT widths from 108 inches to 144 inches in both non-heated and heated electric configurations. Visit the individual product pages for BCT pricing, voltage options, and specifications.
Features and Benefits
The following features apply to all BCE and BCT Series units available through Barron Equipment.
- 18-gauge 304 stainless steel construction — corrosion-resistant in washdown and high-humidity environments
- USDA, FDA, and AIB approved — certified as a method of flying insect control across both series, heated and non-heated
- Galvanized centrifugal fans with double-inlet design — draws air from both sides of the fan wheel for increased volume and efficiency
- Directional air foil vane factory set at ±20° — adjustable during installation to accommodate site-specific wind or door geometry
- Removable motor/blower plate as one piece — simplifies cleaning, inspection, and motor replacement without specialized tools
- Permanently lubricated motors — no regreasing required over the service life of the unit
- ETL Listed for indoor use — outdoor ETL listing available if specified at time of order
- Optional recleanable 1/2″ filter — available on both series; 24-month parts warranty on non-heated models
Applications
BCE and BCT Series air curtains serve facilities where open doorways create risk for insect entry, temperature loss, or contamination.
- Food processing facilities — USDA, FDA, and AIB approved; supports FSMA and HACCP pest control requirements at receiving doors and production entries
- Beverage production plants — temperature separation and insect control at high-traffic production entries
- Cold storage and refrigeration rooms — non-heated models maintain separation between refrigerated and ambient zones without introducing warm air
- Warehouses and distribution centers — continuous forklift and cart traffic without requiring doors to cycle open and closed for each pass-through
- Loading docks — BCT Series covers openings up to 10 feet high and 144 inches wide, matching standard and oversized dock doors
- Commercial kitchens and food service — BCE Series fits personnel doors and service entries; supports health inspection compliance
- Hospitals and healthcare loading areas — insect control and sanitation at receiving docks and service entries
- Packaging facilities — temperature and contaminant separation at production area entries for food, pharmaceutical, or medical products
How to Size Your Air Curtain
Measure the inside-to-inside track dimension of your door opening. The air curtain width must match or slightly exceed that measurement to maintain an effective barrier.
- Openings up to 8 ft. high: BCE Series — available in 36-inch and 42-inch widths
- Openings up to 10 ft. high: BCT Series — available in 108-inch, 120-inch, 132-inch, and 144-inch widths
- Full coverage required: any gap in width creates an entry path for flying insects and outside air
- Outside standard sizes or heights: contact Barron Equipment at 800-397-6690
Selection Assistance
Barron Equipment product specialists help match the correct unit to your opening by reviewing door width, mounting height, heated or non-heated configuration, voltage and phase requirements, and mounting position — interior for climate control or both, exterior for insect control only.
Installation and service support is available throughout Iowa and the Midwest from Barron Equipment’s Davenport, IA (4710 N Brady St) and Des Moines, IA (2276 NE 46th Ave) locations. Barron Equipment has been serving commercial and industrial facilities since 1979. Use the form above or call 800-397-6690.
Frequently Asked Questions
What is an air curtain door?
An air curtain door is a fan-powered barrier system that projects a controlled stream of air across an open doorway. It blocks flying insects, dust, and outside air from entering a facility while allowing continuous personnel and equipment traffic.
What is the difference between BCE Series and BCT Series air curtains?
The BCE Series covers openings up to 8 feet high in 36″ and 42″ widths using 1/2 HP single-phase motors. The BCT Series covers openings up to 10 feet high in 108″ to 144″ widths using 3/4 HP multi-motor systems. Both are 18-gauge 304 stainless steel and USDA, FDA, and AIB approved.
Are these air curtains USDA and FDA approved?
Yes. All BCE and BCT Series units are approved by the USDA, FDA, and AIB International as a method of flying insect control, making them appropriate for food processing, cold storage, beverage production, and other regulated environments.
Should I choose a heated or non-heated air curtain?
Non-heated models are used at cold storage openings, interior zone separations, and insect-control-only applications. Heated electric models add supplemental warmth at exterior openings in colder climates. Heated units require 3-phase power (208/3, 240/3, or 480/3).
What voltage and phase options are available?
Non-heated BCE: 120/1, 208/1, 240/1. Non-heated BCT: 120/1, 208/3, 240/3, 480/3. Heated electric (both series): 208/3, 240/3, 480/3. Contact Barron Equipment to confirm the correct match for your electrical service.
Can air curtains be installed outdoors?
All units are ETL Listed for indoor use. Outdoor ETL listing is available if specified at the time of order. For insect control only, the unit may be mounted on the exterior of the opening; for climate control, mount on the interior.
What is the lead time for Powered Aire air curtains?
Approximately 4 weeks from the order date for all BCE and BCT Series models.
How do I maintain a stainless steel air curtain?
Clean the return air screen and optional filter regularly based on environmental dust levels. Inspect the housing quarterly for damage. Motors are permanently lubricated and require no regreasing. The motor/blower plate removes as one piece for deeper cleaning or replacement.
What size air curtain do I need for my overhead door?
Measure the inside-to-inside track dimension of your opening. Openings up to 8 ft. high use the BCE Series (36″–42″); openings up to 10 ft. high use the BCT Series (108″–144″). For openings outside these sizes, call Barron Equipment at 800-397-6690.